Motor Shaft Adapter 14MM to 12.6mm Flat Mill Coupling Waterproof Shaft Head for Gemstone Machine

Model:

Specification:

14 to 12.6 Right teeth (Turn Clockwise tight):

The hole end is fixed by approaching the side screws, and the shaft end (the grinding disc / wheel connected to the 12.7mm hole) is fixed by rotating clockwise

14 to 12.6 Left teeth (Turn Counterclockwise tight):

The hole end is fixed by approximating the side screws, and the shaft end (the grinding disc / wheel connected to the 12.7mm hole) is fixed by rotating counterclockwise.

Motor shaft adapter

Material: high carbon steel

Length: about 75mm

Big end outer diameter: 40mm*length 45mm

Small end outer diameter: 12.6mm* length 30mm

Aperture at the bottom of the adapter shaft: 14.1mm

Top diameter of adapter shaft: 12.6mm

Can be mounted on a 14mm shaft and connected to a 12.7mm hole

Application: Convert 14mm shaft to 12.6mm shaft, motor adapter head, the hole end of the shaft adapter is connected to the 14mm shaft (such as a 14mm shaft motor), and the shaft end of the shaft adapter can be connected to a 12.7mm bored grinding disc , Grinding wheels and other tools.