Stainless Steel Glass Rinser High-Pressure Cup Washer Sink Washer Glass Cup Bottle Washer Kitchen Sink Accessories

Specifications:

【Quick cleaning】Brush Nickel,classical and elegant, can be matched perfectly with your kitchen environment. Multi-angle water outlet cleaning head realizes multi-angle spray hole washing and effectively wash your cup, saving time and effort, convenient and practical.

【Convenient and efficient】From wine glasses to baby bottles to travel cups, it conveniently rinses virtually any drinkware, so you can spend less time soaking and scrubbing. Brush Nickel finish resists water spots and fingerprints

【Simple to use】Put the mouth of the cup downward and press the bottom of the cup lightly to automatically spray water for cleaning. When the cup is cleaned, remove the cup and stop spraying water.

【Simple DIY project】Simple DIY replacement for a soap dispenser, kitchen sprayer or sink hole cover - the perfect complement to your kitchen Faucet.It only takes your several minutes to install our glass rinser all by youself.

Installation guide

Step 1-2

Slide mounting shank through sink from above, then slide the shank through the rubber washer , then through the steel support washer.

Step 3-4

Ensure base is aligned with sink and outlet extends into basin prior to fully tightening mounting nut, tightening the screw.

Step 5-6

Then link the section at 1/2 of the inlet pipe to the pipeline of the glass rinser.

Determine whether you wish for your new glass rinser to be supplied by cold or hot water. Unthread existing faucet supply line from angle stop on the chosen side. Thread provided tee onto angle stop in place of the supply line that was disconnected in the previous step. Thread both the faucet supply line and the 3/8" end of provided supply line to tee.Thread the 1/2" end of provided supply line to mounting shank. Wrench may be used on shank flats to avoid rotation. When supply line is installed, check alignment and retighten mounting nut.

Package Included:

:1x Cup washer 1x 100cm hose 1x 1/2 stainless steel tee（diameter 20mm）