Carnation Flower Making DIY Resin Jewellery Accessories Silicone Mould Handmade Chocolate Flip Cake Baking Moulds

Product specification

Material: food-grade environmental protection liquid silicone

Product size:6.5*6.2*1.5 cm

Product weight: 38 g

Color: pink

Packing: OPP bag

Uses: For making DIY resin jewelry accessories, chocolate cake dessert decoration accessories

Warm tips

1. Please allow 1-3 mm error due to manual measurement. Please make sure you don't mind before ordering.

2. Due to the difference of different monitors, there is a difference between the picture and the actual color of the item, please make sure you don't mind before ordering.

3. If you encounter any unsatisfactory problems, please do not comment first, contact us at the first time, we will provide you with a better service experience, thank you very much!

Silicone mold Product Features

1. Silicone Silicone main component is silica A is present in the sand, stone, crystal natural ingredients. Not rubber Rubber, nor plastic Plastic! Silica gel is a rock on the beach, low-carbon environment.

2. The high-strength silicone flexibility, corrosion resistance, optimum temperature for cooking, baking, is the best raw material in direct contact with food, and simple and practical.

3. Adoption of detection, health, natural antibacterial, can prevent bacterial and fungal growth. Therefore, infant supplies, medical supplies, there are a lot of silicone products. Such as: pacifiers, silicone plastic and the like.

4. Can be recycled, durable, low energy consumption.

5. The mechanical properties of a stable structure, which has extreme temperature resistance, a wide temperature range. Temperature the lowest temperature of minus 40 degrees, the maximum temperature of 230 degrees, the heat that is evenly frozen.

6. having other types of cleaning agents and corrosive substances corrosion resistance and easy to clean.

7. After use, any raw material will not stick to the mold.

Cleaning and maintenance of the mould:

1. Before using for the first time, wash with water or detergent to remove surface dirt. Before baking the mould, apply a small amount of butter inside the mould. Even if the mould is in use, if the empty slot can be emptied by adding water to the slot, it is strictly forbidden to bake it empty.

2. After each use, please soak the mould in diluted detergent solution for 10-30 minutes and wipe it clean with a soft cloth, do not use harsh cleaning ball or other objects to avoid scratching the mould and causing damage to the mould. After cleaning, please air dry and put it into the storage box. Silicone is prone to electrostatic reaction and will attract tiny particles and dust in the air, so avoid exposing it directly to the air when it is not in use for a long time.

3. for the oven, it must be placed in the middle part of the oven at a distance of about 10 cm from the heater and 5 cm from the inside of the oven to avoid damaging the temperature of the mould.

4. There is a slit in this part of the mould which has been cut at the factory and the release is for the convenience of the buyer. If it is not cut, it cannot be demoulded. To use, cut and wrap in cling film or put on a rubber band to pour the liquid.