Upgraded D2 Inductance Tester Type-C Power LED Indicator for Electronic Motherboard Coil Repair & Troubleshooting

Upgraded D2 Inductance Tester Type-C Power LED Indicator for Electronic Motherboard Coil Repair & Troubleshooting

This is an upgraded version featuring a new power indicator light (which illuminates when plugged in) and an upgraded high-power transistor.

Features:

1. Features Type-C power supply, high precision, strong stability, user-friendly operation, and rapid troubleshooting

2. Approaches the inductor under test: Indicator light illuminates for normal operation, extinguishes for abnormalities

3. Plug-and-play simplicity and portability: User-friendly operation with button controls; plug in and troubleshoot anytime

4. Green light directly displays fault status: Illuminates during testing to confirm inductor is functioning normally without damage

5. Mainboard coil tester for mobile phone component fault detection and diagnostic repair

Parameter:

Interface: Type C

Product Dimensions: 75*27mm

Usage Instructions:

1. Plug in the charger

2. Press the button and bring the sensor end close to the inductor to be tested

3. The indicator light illuminates when the inductor is functioning normally

4. If the indicator light does not illuminate, it indicates the inductor is malfunctioning

This inductance tester is designed solely for testing inductors!!!

Operating instructions:

First, power on the tester; the circuit board itself will not show a reaction at this stage. The circuit board containing the inductor to be tested must also be powered on. To test an inductor, press and hold the switch and bring the tip of the small tester board close to the inductor (Do not touch the inductor directly, as some are not insulated). If the indicator light on the tester turns on, the inductor is functioning correctly. If the light does not turn on when the tip is near the inductor, the inductor is faulty and requires repair.

Note: Inductors are often difficult to test during repairs; this specialized tool was created to facilitate the testing and repair process.

Package include:

Tester*1