Car Headlight Chemical Polishing Kit Headlights Liquid Polymer Repair Fluid Scratch Remover Car Headlight Polish Restoration Kit

Description:

The headlight restoration can effectively help you eliminate the car headlight scratches and solve yellowing, blurring, oxidation and other problems, extending the service life of the car headlight.

Features:

-Effectively eliminate the car headlight scratches and solve yellowing, blurring, oxidation and other problems.

-Restore headlight clarity, increase visibility and safety.

-Also suitable for new headlights, helping maintain and protect headlights.

-Easy to use, featuring high transparency and strong adhesion.

-Perfect for helping extend the service life of the car headlight, making the headlights brighter.

Operation Instructions:

1. Check the damage of headlight, common problems are: crazing, yellowing, oxidation, blurring, molting, scratches and other problems.

2. Please use in a clean, dry and windless environment. Before sanding, cover the lamp with protective film, and then polish the lamp cover with sandpaper until there is no glossiness. Use 180#, 240#, 360#, 600#, 800#, 1200#, wash and cross polish with water from small to large, Polish thoroughly and do not omit the scope, then clean with water after polishing and dry with towel.

3. Add liquid into the atomizing cup (the unused coating liquid can be recovered, and a little more can be added appropriately), heat it to steam, power on the headlamp, unplug the power after atomization, exposed to the sun. Wipe the water from the headlight, and recover the coating liquid.

Supplementary instructions for use:

1. Sandpaper should be used from small specifications, and then use large specifications. You need to rinse with water every time you change the sandpaper.

2. Before use, it is necessary to put a seal around the headlights to prevent the subsequent spray from spraying to the places around the car headlights.

3. Normal cups only need to be heated for 5-10 minutes, but they still need to be operated according to the actual situation. You have to wait until steam appears before spraying.

4. It should be noted that after the headlights are polished, they must be rinsed, and one pair must be sprayed with steam after being thoroughly dried.

Package List:

Option 1 100ml Black set :

1 x Black Atomizing cup
1 x Long Cup Lids
1 x Rubber circle
1 x EU PLUG Power adapter
1 x 100ML Repair Fluid
1 x Masking Tape
6 x Sand Paper（Half of the whole picture）

Option 2 350g Black set :

1 x Black Atomizing cup
1 x Long Cup Lids
1 x Rubber circle
1 x EU PLUG Power adapter
1 x 350g Repair Fluid
1 x Masking Tape
6 x Sand Paper（Half of the whole picture）

Option 3 500ML Black set :

1 x Black Atomizing cup
1 x Cup Lids（Bend mouth）
1 x Cup Lids（Flat mouth）
2 x Rubber circle
1 x Rubber tube
1 x EU PLUG Power adapter
1 x 500ML Repair Fluid
1 x Masking Tape
6 x Sand Paper

Option 4 800g Black set :

1 x Black Atomizing cup
1 x Cup Lids（Bend mouth）
1 x Cup Lids（Flat mouth）
2 x Rubber circle
1 x Rubber tube
1 x EU PLUG Power adapter
1 x 800g Repair Fluid
1 x Masking Tape
6 x Sand Paper