JAYO 3D Printer part PETG/PLA Meta/PLA/SILK/PLA PLUS/TPU Filament 1.75mm for 10Rolls FDM 100% No Bubbel craft part DIY Materials

1.PETG Filament Features & Parameter:

PETG Filament Features:

1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent
The toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks
And warping.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable
Co-print all kinds of commonly used models, crafts, industry
Pieces, advertising words, etc.

PETG Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=320M,
3.0MM(1KG)=105M

2.PLA Meta Filament Features & Parameter:

PLA Meta Filament Features :

1. Environmentally friendly, non-toxic and biodegradable
2. High strength and rigidity
3. Soft and warm colors
3. Low shrinkage
5. 【Good toughness, not easy to break easily】: The toughness of PLA Meta is similar to the existing PLA+, it achieves high purity, low shrinkage and excellent layer adhesion, meeting your needs for higher quality functional parts printing projects
6. 【Printing temperature 180~200° (reduced and printing temperature range increased)】:
* Lower printing temperature means more energy saving and environmental protection, reducing printer loss.
* The wider printing temperature range means that customers have a larger operating space, and the printing failure rate caused by improper temperature settings is greatly reduced.
7. 【Not easy to draw】: The printing model effect is better than our current PLA and PLA+. The surface of the model has a good visual effect and is not easy to draw. This is especially noticeable when printing suspended models.
8. 【Good fluidity】: The printing fluency is better than the existing PLA and PLA+, which greatly improves the printing success rate.
9. 【Good drop resistance and impact resistance】: After the drop test, the drop resistance is about double that of the existing PLA and PLA+.

PLA Meta Product Parameter:

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 180-200℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.35KG/roll

3.PLA PLUS Filament Features & Parameter:

PLA PLUS Filament Features:

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;
6. 10 times higher toughness than PLA on the market
Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork, industrial design samples
And product models with higher toughness requirements.

PLA PLUS Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 210-235℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110Mw Shrinkage;

4.SILK Filament Features & Parameter:

SILK Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Close to silk effect;
3. Low shrinkage
4. Toughness 50 times higher than PLA on the market
Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork, industrial design samples
And product models with higher toughness requirements, etc.

SILK Product Parameter:

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Pull force (KGF): 6-8
Melt index: 5-10g/10min
(190℃, 2.16kg)
Elongation at break: 200%
Printing speed: 30-60MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=330M

Q&A
1. Whether global free shipping or not ?We will not send the parcel for free to all countries,Because of the shipping fee is different from to every country.We can send the parcel for free if your delivery address in Europe or the United States.The Buyers from Others Countries,we will send the parcel from China,and need pay some Shipping fee to the Company 2.Where are you shipping From and how long do I received the parcel?KAIGE is Top Brand from 3D Printer.We have a lot of warehouse global world.They are local in Spain/France/Czech Republic/Germany/United Kingdom/United States/AustraliaIf you delivery address in Europe or the United States.It will be taken 2-12 days to rexceive the parcel.Buyers from others countries will spend 3-14days on wait to receive the parcel.3..Why I need pay tax for our local Express or for local customs ?Answer : if your local Express company charge your money ,please ask them why charging fee . and for what ? it is very important for buyer.About customs charging fee . no body can control , every country customs has different Import and export tariff system.
Return & Refund:
1. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number.2. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
About Guarantee:
We provide after-shop service for each order and each roll, feel free to contact us if you have any problem in using our products, kindly send us the label in the spool, we will offer some improvement suggestion in printing/refund if it 's defective. :D
About Feedback:
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.