SUNLU UV Resin Photopolymer Resin 1kg Resin Standard 3D Printer Photopolymer Resin LCD 3D Printing 405nm UV Curing

Parameter

Net Weight: 1 KG

Gross weight/box: 1.19KG

Features

1. Ordinary rigid resin, easy to shape and easy to use;

2. Compatible with most LCD printer models on the market;

3. The best use effect within one year.

Precautions:

1. Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight;

2. Do not take it orally, keep away from children, wear gloves before use, avoid direct contact with the skin, and keep indoor ventilation; do not get into the eyes, if accidentally touched, rinse with plenty of water as soon as possible, if you feel unwell, seek medical attention in time;

3. The printed resin model needs to be cleaned with high-concentration alcohol (above 95% is recommended, the higher the better) for about 30 seconds; after cleaning, the alcohol is dried and then cured for the second time, so that the best performance can be obtained;

4. Do not pour the used resin in the chute back into the unused resin, and do not put the resin in the chute for a long time without using it. Pollution of the resin affects the printing effect;

5. Store in a dark place at room temperature. The sun contains ultraviolet rays, which will cure the photosensitive resin; it is recommended to store at an ambient temperature of 15-35°C. The lower the temperature in winter, the higher the resin viscosity;

6. Keep sealed to avoid dust or moisture, which will affect the print quality.