Cool Plate For Bambu Lab P1 X1 P1S P1P P2S X1C X1E X2D A1 H2D H2S 257x257mm Cold Build Plate 346*355mm Removable Surface Platfor

About 257x2 57mm:

·Universal Compatibility:

Comgrow ArcticGrip Aurora cold build plate is designed for Bambu-Lab A1 P1S P1P X1C X1E 3d printers, compatible with PLA(30-50℃), PETG(50-70℃), ABS, PA and other filaments.

·Super Strong Adhesion:

The special rough frosted surface of the platform plate is processed using special manufacturing techniques to create a micro-scale textured structure with a roughness of approximately Ra 3.0 μm, effectively enhancing first-layer adhesion, and not easy to warp while firmly locking during the printing process.

·Energy-saving and Eco-friendly:

This Frosted Spring Steel Sheet is coated on both sides with a proprietary epoxy resin, facilitating printing at room temperature. No need to preheat printer’s heated bed, saving energy, reducing your time and makes printing faster.

·Effortless Prints Removal:

The Frosted Heated Bed Cover enables you remove prints easily. Slightly bend the surface and watch the prints fall right into your hands, no need of any scraping or prying tools. Moreover, your prints would detach cleanly from the surface of the build plate.

·Easy to Clean:

Only use clean water to clean the build plate surface. DO NOT use alcohol or chemical cleaners since they may cause permanent surface damage. With our innovative self-healing coating, a quick wipe is all it takes to restore its original adhesion, ensuring reliable performance every time.

About 346x355mm:

·Universal Compatibility:

Comgrow ArcticGrip Aurora cold build plate is designed for Bambu-Lab H2D H2S 3d printers, compatible with PLA(30-50℃), PETG(50-70℃), ABS, PA and other filaments.

·Super Strong Adhesion:

The special rough frosted surface of the platform plate is processed using special manufacturing techniques to create a micro-scale textured structure with a roughness of approximately Ra 3.0 μm, effectively enhancing first-layer adhesion, and not easy to warp while firmly locking during the printing process.

·Energy-saving and Eco-friendly:

This Frosted Spring Steel Sheet is coated on both sides with a proprietary epoxy resin, facilitating printing at room temperature. No need to preheat printer’s heated bed, saving energy, reducing your time and makes printing faster.

·Effortless Prints Removal:

The Frosted Heated Bed Cover enables you remove prints easily. Slightly bend the surface and watch the prints fall right into your hands, no need of any scraping or prying tools. Moreover, your prints would detach cleanly from the surface of the build plate.

Easy to Clean:

Only use clean water to clean the build plate surface. DO NOT use alcohol or chemical cleaners since they may cause permanent surface damage. With our innovative self-healing coating, a quick wipe is all it takes to restore its original adhesion, ensuring reliable performance every time.