36v/48v/60v 500w 750w Electric Bike Brushless Motor Controller with LCD Display Electric Bicycle Scooter E-bike Part Accessories

Controller

Motor style: Brushless

Rated voltage: 36v-60v

Rated power:750W

Current: 35A±1A(750W)

Controller Size: 115mm*62mm*40mm

Use for: Electrci Tricycle, ebike, e-scooter, e-car, e-golf car etc.

How to use self-study:

When using the controller and the motor to work for the first time, should first use self-study wire.

Step 1. Connect the motor wire, Hall wire, battery wire, and other function wires.

Step 2, connect the self-study wire, the motor rotates forward, let it learn automatically for 10-20 seconds, disconnect the self-study wire, connect to other function wires, complete the self-study, and do not need to use it in the future.

How to set the P07:

1. If your motor have speed sensor wire ( some is the white wiring in hall), the P07 set to 1.

2. If your motor without speed sensor wire ( hall is 5 wiring) , so you must know your motor magnet number and motor gear ratio.

P07= magnet * gear ratio ( ex: magnet =20 , gear ratio= 1:4.5 , so P07 set to 20*4.5=90

Headlight display

(Turn-on the lights power) Press and hold the "+" button 3 seconds to turn on/off ;

Set up operation(Only need to set P03, P06, P07, P10, P13)

◆ Press "+" and " -" button together 3 seconds to enter the setting interface;

※ Press "M" button to enter setting item;press up and down button to select parameter;

P01:meter backlight;

P02:Mileage unit,0:KM;1:MILE;

P03:Voltage level, Base operating voltage;

P04:Sleep Time, 0: no-sleep, unit: min

P05:Assist position,0:3,1:5,mode;

P06: Wheel Diameter, unit: inch;Accuracy:0.1;

P07: Number of speed magnets , range :1-100; ( Note: here only for set speed display, doen't affect the actual speed)

P08:Speed Limit, Range:0-50km/h,50: means Unlimited speed;(When speed big than setting speed, Turn off the PWM output)

P09:Zero or non-zero start,0:zero start; 1:non-zero start;

P10:Drive Mode setting: 0 : Power Drive, throttle invalid; ( Assist power)