JSHOU BIKE Bicycle Pedals Ultralight Carbon Fiber Non-Slip Road Mountain MTB Bike Pedal Waterproof Bicycle Accessories/Parts

Features:

1.Thanks to the high modulus and high hardness of the T400 carbon fiber material and the joint action of the high-strength titanium alloy shaft; the overall foot feel is very tough and direct, the pedaling force transmission efficiency is extremely high, and the pedaling power loss is very small.

2.One-piece forming wide and thick carbon fiber main body, the area is large enough to provide a very free and comfortable tread surface The large hollow in the middle of the tread surface can quickly remove mud and sand and further effectively reduce weight 5 high-strength aluminum alloy anti-skid nails on one side Grip feet The effect is excellent.

3.No matter on bumpy mountain road conditions or road racing on the road, it has a competitive performance for road riding. It is very suitable for riders who want to reduce weight but do not want to use self-locking bicycles.

Why T400?

Although the performance of T400 carbon fiber is slightly different from that of the top-equipped T1000 ultra-thin carbon fiber, there is no need to make the pedal body ultra-thin, so there is no need to use T1000 carbon fiber. The thick T400 body, because it is thick, its strength and hardness can also reach the peak level. The overall stretching lightness and hardness are much better than aluminum alloy, and there is no pressure on the impact of mountain racing!

Product details：

Product name：carbon fiber titanium shaft ultralight bicycle pedals

Place of origin：shenzhen, china

Main body material：t400 carbon fiber

Shaft material：Tc4 titanium alloy

Structure：unilateral 3 palin

Net weight：182g/pair

Be applicable:mountain cross-country, road racing, folding bike upgrade, ultra-lightweight and high-strength, all-round applicable.

Carbon fiber ultralight bicycle pedals：T400 carbon fiber large-area tread body + titanium alloy axi+ 3 bearings + double-sided non-slip aluminum nails

When disassembling and installing the nut at the end of the axle, be sure to pay attention to the screwing direction:

tighten counterclockwise on the right side and loosen clockwise; tighten clockwise on the left side and loosen counterclockwise.

Installation:

1.Install pedal to separate left and right sides,otherwise it will damage the crank thread.

2.Left pedal marked “L”,right pedal marked”R”.

3.Use 6mm hex wrench or 15mm wrench for installation.

4.Lock it clockwise with left pedal,lock it counterclockwise with right pedal .

Tipps:

1.Check pedal periodically,do not ride if pedals are loose!

2.The anti slip nail may scratch the skin,please pay attention to protection!