Dental Orthodontic Adhesive Light Cure Braces Glue Kit for Orthodontic Brackets Direct Bonding System Blue Glue

Orthodontic Adhesive Light Cure Braces Glue Kit

For Orthodontic Brackets Direct Bonding System

Blue Glue

This orthodontic adhesive provides a longer working time and a rapid setting time. Can be placed directly into bands. Excess flash is easy to clean up prior to the light curing and the cement is easy to see due to the blue color.
It contains fluoride to reduce the chance of declacification.

Self Cure

①Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.

②Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;

③Brushing: apply a thin layer of the primer over the etched enamel with the brusher;

④Bonding: apply another thin layer of the paste to seal the edges, adjust the bracket within 20 sec, give pressure for 5 to 10 secand remove the excessive primer and paste after 40 to 60 sec; then do orthodontic procedures followed 5-min curing.

Light Cure

Warning: Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.

Precautions: A void eye and skin contact. Wear gloves when handing this material.

Precaution:Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light

This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive