Dental Orthodontic Adhesive Light-Cure Self-Cure Kit Etchant Acid Gel Light Cure Primer Bonding Brackets Braces Material

Ⅰ. Product Specifications

1 Light Cure Paste 3.5g
2 Light Cure Primer 3ml
3 Self Cure Paste 3.5g
4 Self Cure Primer 3ml
5 Etching Gel 5ml — 2 years
6 Light Cure Set (Paste + Primer) 3.5g + 3ml Light Cure
7 Self Cure Set (Paste + Primer) 3.5g + 3ml Self Cure
Shelf Life：2years

Ⅱ. Product Features

Self Cure
①Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.
②Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;
③Brushing: apply a thin layer of the primer over the etched enamel with the brusher;
④Bonding: apply another thin layer of the paste to seal the edges, adjust the bracket within 20 sec, give pressure for 5 to 10 secand remove the excessive primer and paste after 40 to 60 sec; then do orthodontic procedures followed 5-min curing.
Light Cure
①Warning: Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.
②Precautions: A void eye and skin contact. Wear gloves when handing this material.
③Precaution:Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light
This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive

Ⅲ. Instructions for Use & Applications

1. Surface Preparation
Clean and dry enamel or bracket base
Apply etching gel for 15–30 seconds, then rinse and dry
2. Primer Application
Apply a thin layer of primer and air dry gently
3. Adhesive Application
Apply paste to bracket base and position on tooth surface
Light Cure: 10–20 seconds / Self Cure: 3–5 minutes

Applications

Bracket bonding
Buccal tube bonding
Orthodontic button bonding
Lingual attachment bonding
Retainer fixation
Bracket rebonding
Appliance repair

Ⅳ. Precautions

Avoid moisture and saliva contamination during bonding
Use plastic or disposable mixing tools
Replace caps tightly after use to prevent curing
Store in a cool, dry place (2–25°C), away from sunlight
For professional dental use only