Car Hood Decorative Light LED Daytime Running Light Strip Start Scan Yellow Auto Turn Signal Indicator Headlight Universal 12V

Specification:
Brand Name:MC
Votage:12V DC
Fitment:Universal Car
Material:silicon+pvc
Modes:Fix,Meteor,Dynamic Modes
Protection grade:IP68
Color:White,Blue,Ice blue,Red and Yellow
Length:120cm 150cm 180cm 200cm 220cm 240cm
Function:Dynamic Daytime Running lights,Star-scan DRL,Car decorative atmosphere lights,Car ambient light
Application:car hood light,Car door light,car trunk light

The power-on scanning mode is fixed and has a memory function.


Features:
1,Super bright lamp beads, side illuminate,super bright even at daytime.
2,Flexible light strip,can be bend and cut according to your need.
3,3MM thiness size,stealth installation,seem to the original,Compliance with traffic regulations.
4,Widly applications,can use to the car hood light,car door light,turnk light,ambient decorative light.
5,Easy to install, glue+wire connection.

Wire Connection:
Red line:positive pole of headlight
Black wire:ground or negative
Yellow line:positive pole for left turn
Blue line:right turn positive

1.Black line connect to negative pole + Red line connect to ACC = Engine starts to light up.
2.Black line connect to negative pole + Red line connect to DRL= Turn on DRL to light up.
3.Black line connect to negative pole + Red line connect to Low beam lights = Turn on Low beam lights to light up.
4.Black line connect to negative pole + Red line connect to High lights = Turn on High lights to light up.
5. Other locations you want to install only need to connect the corresponding positive and negative poles

The light can be cut into sections of 4cm

Need to be re-sealed after cutting. And adjust the length of the light by controlling the controller


Controller button description:
①.Adjust the length of the cut light bar:
a. Press and hold + when the light bar is in the daytime running light state, and the white light will appear half bright, with the midpoint highlighted. (When the light is in the daytime running light state, long press the controller button +, the light brightness will be reduced by half)
b. Short press + to increase the length. Short press - decrease the length.
c. After the adjustment is completed, press and hold the + key to save and exit.

②.Adjust the starting point of the running water turn signal: (Please adjust the luminous length of the cut light bar first)
a. When the light bar is in the daytime running light state, the double flashing light changes to yellow. Press and hold +, and the yellow light will remain on.
b. Short press + to increase the length. Short press - decrease the length.
c. After the adjustment is completed, press and hold the + key to save and exit.

③.Adjust the daytime running light mode
When the light bar is in the daytime running light state, press and hold the - button. Switchable between always-on and dynamic modes.