Merlin+ 94335E Garage Door Remote Control for C945 C940 C943 MR600 MR650 MT60 MR800 MR800A MR850 MR1000 MT60P MT230 MT600 MT800

Suits remote models: C945, CM842, C940, C943

Suits motor models:

MR60, MR600, MR600A, MR650, MR800, MR800A, MR850, MR1000, MT60, MT60P, MT230, MT600, MT800, MT1000, MT3850, MT5580, MT5580P, MR850, MR1000, MGL300, MGL400, MGS300, MGS500, MGS500T, MGS1000, MJ3800, MJ3800R

Does NOT suit:

Merlin+ 2.0 remotes (will be printed on the front) or EVO model motors, M230T OR M430R MOTORS

How to program this replacement remote control:

1) Press the programming button on your motor. The LED will go on.

2) Press desired button on the new remote control.

3) The opener light will flash, confirming successful programming. Now the opener will operate when the remote control push button is pressed.

To erase all codes from the receiver, hold the receiver's Learn button until the indicator light goes off (after 6 seconds). All codes that the receiver has learned will be erased.

Include:

1 x Remote Control

1 x Battery

1 x Keychain

1 x English Manual