1/2/4 Buttons Teleco TXP433A01 TXP433A02 TXP433A04 TXP-433-A01 TXP-433-A02 TXP-433-A04 433.92MHz Rolling Code Garage Door Remote

1/2/4 Buttons Teleco TXP433A01 TXP433A02 TXP433A04 TXP-433-A01 TXP-433-A02 TXP-433-A04 433.92MHz Rolling Code Garage Door Remote

Compatible with

Teleco TXP-433-A01
Teleco TXP-433-A02
Teleco TXP-433-A04

Disclaimer:
Your Old remote must be same as the advertisement , new remote do not compatible with other remotes

Feature:

1. Type of programming: Programming with the receiver
2. Number of channels: 1/2/4
3. Code: rolling code
4. Frequency: 433.92 MHz
5. Battery: CR2032

Programming:

The remote control is the same function as your original remote.it should programming with original receiver according to your original Manual when you get it.
1. Locate the Learn / Code Set button on the motor. This is usually under the lamp cover, or on the back of the motor.
2. Press the Learn / Code Set button once, then let go. A light should illuminate.
3. Press the desired transmitter button once, and the light will go out.
4. Press the remote again the the light will flash on the motor and then go out, signifying the remote has been coded.
5. Test the operation of the remote.

Include:

1 x Remote Control
1 x Battery
1 x English Manual