433mhz Garage Door Remote Control 433.92 MHz Fixed Code Transmitter

Pay Attentions to:

Dear friend, please check the following instructions before you buy; if you do not meet the conditions still to buy, we will not accept returns

Please confirm

Condition I: the original remote control may be used normally

Condition II: know the transmission frequency of original remote control (referring to the following diagram)

Condition III: IC of original remote control is 2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527(EV1527,HS1527,HX1527),FP527,CS5211,SMC918,SMC926,AX5026,AX53263,AX53264,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. 5026-2 5026-3 5026-4 FP527 HT12E or without code. IC model of original remote control is 2262 2260 1527 2240 and compatible IC It is unnecessary to consider vibration resistance and address code. The project may be compatible to vibration resistance and address code. only support static code, does not support dynamic code.

Inapplicable

The inapplicable IC is HCS300 30 HCS301 and compatible rolling code
It's very very important. Don't ingnore them.
Don't simple think the frequeny is same then it can be copied.It's not true.

1). Frequency: 433MHz(433Mhz=434Mhz=433.92Mhz)
2). self-learning
3). 4 channels
4).Battery: 12 V / 27A (included)
5). Dimensions: (W x H x D): 37 x 60 x 12 mm

Pay Attentions to

1.your remote control image must the same as our picture ,if not will useless

2.if you are not sure whether the remote right for you, you'd better take a photo Then send to us.we will help you

How to program the remote:

Face to face copy your original remote control

Step:1:Clear the history code from duplicator

1:Press button A and B continuously until LED flash 3 times

2.Release button B (Keep pressing button A),and press button B Slowly for 3 times,LED flash

3.Release button “A”,finish code clearance.



Step 2,Copy code from original transmitter

1. Put duplicator aside of original transmitter,as close as possible.

2. Press and hold button A of original transmitter,then press and hold button A of duplicator until you see the duplicator’s LED flash

3. Release both buttons,finish code copy,copy other button in same way.

Button A= Lock button

Button B=unlock button

Include

1 x Remote Control
1 x Battery
1 x Keychain
1 x English Manual