Hollarm Wireless Bike Vibration Alarm USB Charging Bicycle Alarm Anti Theft Motorcycle Security Detector Cycling Burglar System

Wireless Bike Vibration Alarm USB Charging Remote Control Burglar Motorcycle Bike Security Detector System Bicycle Alarm

Reminder:

1.Before the first use, please charge it first, and then it can be used normally after activation. It is recommended to use it again after it is fully charged.
2. If you purchased one alarm with two remote controls, the second remote control need be paired for use (see the manual for instructions).
3. If you have purchased a horn, it operates manually and is not controlled by the remote control.

Introduce：

IP54 Waterproof
USB-C rechargeable
3 Installation methods
Vehicle search function
Alarm noise level: 110dB
Levels adjustable volume
Arm and disarm by remote
7 Levels adjustable sensitivity
Operating frequency: 433.92mhz
Remote working time: 1 ~ 2 years (5 times a day)
Remote range: up to 164 feet (up to 229 feet outdoors)
Alarm battery: 4.2V 700mah lithium battery (including)
Remote control battery: 27a (12V) alkaline battery (including)
3 Different ringtones for vehicle search function (Invalid in ARM mode)
Low battery indicator (If alarm is low battery, it will make low-battery prompt sounds when you press arm/disarm button)
Alarm working time: about 1 ~ 3 months. The standby time is about 6 months
Working temperature: - 40 ~ + 70 ℃, storage temperature: - 40 ~ + 70 ℃ Working humidity: < 8

Use the supporting USB charging cable and connect the mobile phone 5-volt charging head (not included). Some fast charging heads are incompatible.

PC + UV resistant material, IP54 waterproof and dustproof, high and low temperature resistance, not afraid of wind and rain, cold and heat.

The remote controller can remotely control the alarm, and the maximum distance must be kept within 20 meters.

Bracket, tie, double-sided tape, 3 installation methods without wiring, suitable for various models!

If the sensitivity is adjusted, press the [Defense] key continuously to adjust the seven level sensitivity from high to low.

If the volume is adjusted, press the [horn] key continuously to adjust the third gear volume from high to low.