New 110dB Door And Window Vibration Alarm Wireless Anti-Theft Alarm With Remote Control Home Bicycle Security Burglar Alarm

To purchase, it is important to know:

1. A separate alarm host needs to be paired with a remote control before it can be used normally. Please refer to the video for the connection method

2.A remote control can be paired with multiple alarm hosts, and an alarm host can also be paired with two remote controls, and their pairing method is the same.

3.Both the alarm and remote control can be purchased separately. If you have any needs, please contact customer servic

Note:

1.If a box contains an alarm host and a remote control, the manufacturer will pair them together. But if there is only one alarm host in a box, then the buyer needs to pair the remote control with this alarm host themselves

2.When the host triggers an alarm for the first time, the alarm sound will sound for 30 seconds before stopping.If the alarm detects continuous vibration, the alarm sound will also continue to sound

Product Features:

● Wireless vibration alarms with remote by detecting gentle touch, push or beat (vibration triggered)

● Remote control range up to 25M

● 10 levels adjustable sensitivity

● Low-consumption design,which makes it can work at least a year

● Alarm need two AAA batteries to operate ( not included )

● Remote need a 12V/27A alkaline batteries to operate ( included )

● 4 Mode-- Arm/Disarm/Panic/Doorbell mode

● Not only a safety/antitheft alarm, but also a Doorbell, in doorbell mode, the vibration alarmdetects vibration the host sound"Dingdong"

● Low battery warning

Remote Control 4 Mode:

● Arm key: Press it, once triggered, alarm will bell 110db voice.

● Disarm key: Press it, the arm status or loud voice will stop.

● SOS key: Press it, the alarm will bell 110db voice though alarm is not triggered. This function will be very helpful when someone is in danger or need emergent help.

● Doorbell key: Press it, once triggered, it will bell "dingdong" to alert you someone is coming in.

Package Including:

1* Alarm ( batteries not included )

1* Remote Control

2*Double sided stickers

1* User Manual

Matching method between alarm host and remote control:At first, remove the host batteries and install back after 1 minute. Press[bell ] key within 2 seconds and hold up the key around 10 seconds continuously, the host produces “Bi…” sound. This indicates the host was entered into the coding learning mode already. Then, release [ bell ] key and press [Disarm ] or [Arm ] again, the host will produces twice sounds “Bi...Bi...” which indicates the code learning successfully.

This method is applicable to the connection of each alarm and remote control

When the door is opening or vibrating, it will automatically warning.