CCEsafety SA10 Smoke Detector 9V Replaceable Battery Fire Alarm Smoke Sensor Hush Button For Home Apartment Rental CE EN14604

Are you still worried about the hidden dangers in your home? SA10 Smoke Detector, 24-hour all-weather protection, give you and your family more peace of mind! Product highlights:

Product highlights:

✅ Authorized Certification

CE certified, meet the strict EN14604 European safety standard,providing professional fire protection for your home.

🔋 9V Replaceable Battery

Equipped with 9V replaceable battery. Easy to replace and maintain, ensuring non-stop smoke detector protection for your home.

⚡ Photoelectric Sensor

High-sensitivity photoelectric sensor(also known as an optical sensor): smoke sensor warns early of smoldering fires for more escape time.

🚨 85dB Audible Visual Alarm

85dB alarm (3m) + red flashing light—this smoke detector grabs attention instantly, even in noisy kitchens or at night.

🔘 One-Click Mute/Test

This smoke detector has one-click mute (silence cooking fume false alarms) and one-click test (check smoke alarm functionality). Simple to use for all ages.

🔔 Low Battery Reminder

Low-battery beep alert: prompt replacement prevents smoke alarm failure, ensuring continuous smoke detector protection.

🛠️ Easy Installation

1 smoke detector per floor/20-40㎡. Choose 2/4-pack for full coverage. Free screws—no skills, 5-minute installation.

📦What does the package include?

Smoke detector with 9V battery, free mounting screws, and English user manual.

If you need Magnetic Holder accessories, please contact customer service to purchase.

Technical Parameters:

F​AQ

Q​:Can this smoke detector connect to a mobile phone APP?

A​:This smoke detector cannot be connected to a mobile phone APP. If you need,please contact customer service for more options.

How to Test a Smoke Alarm for Effectiveness Before Installation?

Instructions for use

1️⃣Test and before installation:

Note ： If the battery is not installed correctly, the smoke detector will not work and maybe destroyed.If the smoke detector operates smoothly, the Red LED will flash once in about 43S.

1）Take the product out of the packaging,take off the installation base from the product via rotating the product on the anti-clockwise direction.
2）Take out the 9V battery from battery compartment, remove the insulation film from the battery, connect the battery to battery buckle and put it back to battery compartment.
3）Depress(keep depressing and release till finish the testing) the test/hush button， the RED LED flashes quickly and in the meanwhile the detector sounds, which means the smoke detector works well. At the same time the product goes into low sensitivity detection mode, round 10 minutes later the product goes into standard sensitivity detection mode again.

2️⃣Installation

1）Choose a right place to install the smoke detector(this product is not recommanded to be installed in humidity,dusty, high temperature place like Kitchen or bathroom).
2）Fix two plastic screw base into ceiling according to installation hole position of smoke alarm base
3）Fix the installation base on ceiling via screws at pre-installed screw base.
4）Make sure the battery is installed and well connected to the smoke detector (you may use the test button function to check) and fasten the smoke alarm to pre-installed base via clockwise rotation.
5）Use the test button again to make a final check

3️⃣Maintain and use

1）Test the smoke detector weekly
2）If the product does not work properly, please check the product according to Failure Analysis and Troubleshooting part as below.If the product still can not work please contact your local dealer and do not open the product by yourself.

4️⃣Failure Analysis and Troubleshooting