Universal Garage Door Opener Remote Control 433MHZ Clone Learning Rolling Code Duplicator For Gate Garage Door

Feature:

Easy to use, the 4 channel remote control system lets you take control of your gadgets,  car, home and garage.

This is not a complete list! If your remote uses the 433MHZ frequency it will work with the remote duplicator.

IC model of original remote control is 2262 2260 1527 2240 and compatible IC.

The battery used in the product is 27A 12V please replace the battery when the remote control distance is insufficient.

Clone up to 4 remote signals from 4 different remotes

The chips that our remote control can copy are:

2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (All manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the single-chip...

Note: If the buyer's HCS200, HCS300 remote control is encrypted, it can't be copied successfully.

Descriptions:

With this remote control, you can control all 433MHz fixed code key fobs.

Some remotes that use this frequency are listed below.

4-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors, Gate Doors, Alarm Systems etc.

This is a fixed frequency remote cloner (433mhz) for copying common fixed and learning code remote controls.

Specifications:

Model: HFY408G

Size: 55*28*14

Color:black

Battery:60mAh

Operating frequency: 433MHz

Powered by 27A 12V battery (included)

Package included:

1 x Remote Control

Note:If your old remote control has a rolling code, please follow the steps below.

1.Clear code: Press the A and B keys at the same time, the light flashes. Then don't release the A button, press the B button three times, the light flashes.

2.Copy: Press the A button on the two remote controls at the same time, the light is on and the copy is successful.The other buttons are copied in the same way.

3.After two remote controls copy each other, you also need to press the learn button on the dashboard and any button on the new remote control at the same time to truly consider the copy successful.