Natural Gas Detector 2in1 And Carbon Monoxide CO Detector, Combustible Gas Leak Detector Monitor For Co, Lpg, Methane In Kitchen

2 in 1 Gas And CO Detector, Plug-in Home Natural Gas/Methane/CO Alarm, Leak Sensor Detector with Voice Promp and LED DisplayNatural Gas Detector and Carbon Monoxide Detector, Plug in Gas Leak Detector for Home, Kitchen, Combustible Gas Leak Detector Monitor for CO, Methane

Certificate :

CE:   Comply With EN50291   ,EN50194

Specification:

Working Voltage:AC 90~240V

Static Current:90mA

Alarm Current:100mA

Rating Power:3 w

Warm-up Time:About 180 S

Sound Level:85dB/m

Operating Temperature:-10~50°C

installation Mode:Wall mounted

Combustible Gas:7±3%LEL，3500±1000PPM

Carbon Monoxide Gas:30ppm, alarm after two hours50ppm, alarm within 60-90 minutes100ppm, alarm within 10~40 minutes300ppm, alarm within 3 minutes

Outline Size:155*110*45mm

About this item:

【Easy To Use】 :Push/test button - Connect to power 90V-240V or 9V rechargeable battery(not included), The detector will display 3 minutes counting.

Visual & Audio Gas Alarm: When the natural gas or combustible gas concentration leaks reach a 5±3%LEL, this gas detection alarm will sound an 70dB alarm and display the dangerous gas concentration level, the alarm sounds and the red light flashes. When Carbon monoxide reaches set concentration, the alarm sounds and the red light flashes.

Powerful Quality & Functionality: Natural gas detector adopting high-quality semiconductor calefaction type sensor. More accurate response times to gas exposure, avoiding the possibility of false alarms. LCD display of combustible gas concentration, plug and play, the LED display concentration changes, and an alarm of 70 dB or more issues.

Detect Various Flammable Gases: Gas detectors for home natural gas and carbon monoxide, Suitable for detecting methane, natural gas, propane, butane, ethane, coal gas, gas oil, gasoline, toluene, sewer gas, alcohol, ketones, and other flammable gases. It is widely used in homes, kitchens, garages, travel trailers, campers, food trucks, restaurants, hotels, and so on. This gas leak detector can decrease the risk of harm resulting from gas leaks, protecting you and your family.

Easy to install CO and explosive gas alarm, which can be used by plugging directly into the power socket to detect leaked gas. The system warm-up time is about 3 minutes. During this time period, the number counts down 180 seconds, you need to wait for the display to show 0P (the system enters the working state) before it can be tested normally. The gas detector does not include batteries and needs to be purchased separately for use in the event of a power outage or socket failure at home.