1-10pcs Steel-Line ZT-07 Garage Door Remote Control Use With Steel-Line SD800 & SD1200 Sectional RD800 Roller Door Motor

1-10pcs Steel-Line ZT-07 Garage Door Remote Control Use With Steel-Line SD800 & SD1200 Sectional RD800 Roller Door Motor

Features:

Features:
LED Indicator
Battery: 27A 12V
Slim Design
Controls up to 4 doors
433.92 MHz Frequency

Compatible Models:

RD800
SD800
SD1200
SPRINT800

Steel Line Programming Instructions:

Press and hold the "P" and "+" buttons on the motor until all the lights on the motor turn on and LED 7 begins to flash.
Press the "+" button on the motor once. All LED lights should turn off except LED 7, signifying that the opener is now in Learn mode.
Quickly press and release (for at least one second) the desired button on your new remote twice. All LED lights will turn on and LED will begin to continually flash.
Press the "P" button on the motor once to save the remote control to the opener. LED 3 will switch on, indicating that the remote control has been successfully programmed to the opener.
Repeat the above procedure additional handsets.

To delete:
Press and hold the "P" and "+" buttons on the motor until all the lights on the motor turn on and LED 7 begins to flash.
Press and hold the "-" button until the LED 7 turns off, then begins to flash again.
Press the "P" button once. LED 3 will switch on, indicating that all codes have been deleted from the opener.

Include:

1 x Remote Control
1 x Battery
1 x Keychain
1 x English Manua