Wisniowski Mido 600 Garage Door Remote Control 433.92MHz For EL11Q EL12Q EL13Q EL3V1Q EL1000 ES6 ELB7Qk2 ST2 EL4T

Wisniowski Mido 600 Garage Door Remote Control 433.92MHz For eL11Q eL12Q eL13Q eL3V1Q EL1000 ES6 eLB7Qk2 ST2 eL4T

Compatibility Model

eL11Q
eL12Q
eL13Q
eL17Q eLN
eLC RT1
eLB7Q
eLB7Qk
eLB7Qk2
eL4T
ELFAA
ST1
ST2
ST3
eL3V1Q
eL3QV1
eL6V1Q
EL6
ES6
ES62000
eL21Q
EL500
EL1000
eL4000
2k433 (only order number 10646)
4k433 (only order number 10647)
4GO (order number 93532 only)
Cover

Description:

1.Type of programming: Programming with the receiver
2.Number of channels: 4
3. Code: rolling code
4. Frequency: 433.92MHz
5.Woring Range: 10-50 m (open space)
6.Remote come with Battery !!!

WISNIOWSKI Remote Programming:

Program to Gate / Garage Door Openers the same way as original WISNIOWSKI remotes,please refer to your receiver's user manual.

Materials required for programming: your receiver!

1.Open your receiver from the garage door.

2.Press the programming button. Inscription is usually: ENR, MEMO or PROG.

3.On some receivers, it is necessary to hold down the programming button.

4..On the receiver the LED indicates the start of the programming mode.

5.Press for one second on a button on the new remote control and let it go again.

6.The LED of the receiver will light differently or goes out to indicate a successful programming.

7.Wait a few seconds to exit the programming mode.

8.Congratulations! Your new remote control is programmed!

What is Included

Remote Control
Battery
Keychain
English Manual