Rechargeable Wireless Airbrush Kit with Compressor Paint Spray Gun for Makeup Nail Art Cake Hair Dye Barber Face Beauty

Specification

Item type: Airbrush kit
Material: Aluminum Alloy
Voltage: 3.7V
Product Type: Single Action
Air Pressure: 22 psi/28 psi/38 psi
Nozzle diameter: 0.3mm
Battery Capacity: 900mAh
Charging Time: 2-3H
Using Time: 20-30min

Product Include

1* Main machine
1* Spray gun
3* Water tank
2 sets* Cleaning brush
1* Dropper
1* Air tube
1* Type-C cable
1* Manual
1* Box

Features

1.Portable airbrush kit . Using 0.3mm nozzle and adjustable airflow regulator, you can screw the regulator to control the spray amount, reduce the blockage problem
2.2 connection methods. The air tubes is included in our package.①Directly connect the spray gun to compressor. ②Connect spray gun to compressor by air hose.
3.Paint Evenly. 0.3mm nozzle, precise spray, consistent color, improve work efficiency.
4.Wide operating range. It can connect the trachea, saving time and effort, can be put into a pocket, making it convenient for you to move over a larger area.
5.3 gear air pressure. Precise control of spray area, concentration and thickness
6.Wireless operation. PSI & Power display at a glance, you can use it anywhere without worrying about running out of battery.
7.Easy To Clean. This airbrush kit comes with 3 different capacity fluid cups (5ml, 20ml, and 40ml) and 2 cleaning brushes. If you encounter any problems such as clogging of the airbrush, paint spattering, compressor not working, etc., during use, please contact us immediately. We will solve the problem for you in the first time.

Operation

1.Open the lid.
2. Add liquid.
3. Long press to turn on, then short press to adjust gear.
4. Loosen the control knob to adjust mist amount (if needed).
5. Push the adjustment valve of the spray gun back to spray out the mist.

HOW TO CLEAN

1. Add airbrush cleaning solution.
2. Block nozzle and pull back trigger.
3. Spray out liquid.
4. Detach the rear.
5. Loosen the screw.
6. Gently rotate and pull out the needle.
7. Wipe the needle clean.
8. Reassemble the spray gun.

Caution

1.Note: water-soluble solution can be used, not oil-based solution.
2.Notes: 5V/1A adapter is recommended (Fast charge not supported).
3.Do not use the product when charging it.
4.To avoid bacterial pollution, it is recommended to clean the product with warm water or alcohol before use.
5.Do not add any cosmetics other than liquid ones. High-concentration product must be diluted with mineral water.
To avoid nozzle clogging, every time you finish spraying you should: ①pour out the remaining liquid in the tank; ②add clean water and spray it (until there’s no spray coming out); ③spray air to completely dry the tank.