Double Side PEI Spring Steel Sheet 180/220/235/310/350 Heated Bed PEI Magnetic Build Plate for Ender 3 Ender 5 CR10 3D Printer

Note:DO NOT USE ACETONE ON POWDER COATED PEI SIDE!!!!

Double Side PEI Spring Steel Sheet 180/220/235/310/350 Heated Bed  PEI Magnetic Build Plate for Ender 3 Ender 5 CR103D Printer

Double side Refined the powder coated PEI side.
Size:180*180mm for KP3S KINGROON printer.
220*220mm/235*235mm/310*310mm/350*350mm optional.
New ​Double-sided PEI powder coated spring steel sheet textured with magnetic Base.
180*180mm for KP3S 3D Printer Hot Bed
Double-sided PEI spring steel sheet textured and smooth (one side is power coated PEI& another side is PEI sheet preapplied)
with magnetic Base

Strong magnetic Base
the thick is 1.5mm, 300LSE tape, magnetism-600GS high temp resist up to 130C.

1.Recommend print temperature:
PLA – 60C
HTPLA – 60C
PETG – 70-80C
PCTG – 70-80C
ABS – 100C

2.Product Usage
PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface