JAYO PETG/PLA+/SILKPLA/PLAMeta/PLAMatte/ABS/ PLA Filament 1.75mm 1.1/0.65KG 3D Printer Filament For FDM 100% No Bubble Mix Color

Name

JAYO PLA /PETG/SILK PLA/PLA Meta/PLAMatte/ PLA+Filament 1.75mm 3D Printer Filament For FDM 100$% No Bubble Mix Color

1.PLA Meta Filament Features & Parameter:

PLA Meta Filament Features :

1. Environmentally friendly, non-toxic and biodegradable

2. High strength and rigidity

3. Soft and warm colors

3. Low shrinkage

5. 【Good toughness, not easy to break easily】: The toughness of PLA Meta is similar to the existing PLA+, it achieves high purity, low shrinkage and excellent layer adhesion, meeting your needs for higher quality functional parts printing projects

6. 【Printing temperature 180~200° (reduced and printing temperature range increased)】:

* Lower printing temperature means more energy saving and environmental protection, reducing printer loss.

* The wider printing temperature range means that customers have a larger operating space, and the printing failure rate caused by improper temperature settings is greatly reduced.

7. 【Not easy to draw】: The printing model effect is better than our current PLA and PLA+. The surface of the model has a good visual effect and is not easy to draw. This is especially noticeable when printing suspended models.

8. 【Good fluidity】: The printing fluency is better than the existing PLA and PLA+, which greatly improves the printing success rate.

9. 【Good drop re

PLA Meta Product Parameter:

Wire diameter: 1.75MM

Tolerance: ±0.02MM

Printing temperature: 180-200℃

Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C

Heating 60-80℃, no glue

Rally KGF: 9-12

Melt index: 8-12g/10min (190℃, 2.16kg)

Elongation at break: 35%

Density: 1.24 (g/cm³)

Printing speed: 50-100MM/s

Bubbles: 100% zero bubbles

Net weight: 1.1KG/roll

Gross weight: 1.45KG/roll

2.PLA PLUS Filament Features & Parameter:

PLA PLUS Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;

2. Bright color;

3. Low shrinkage;

4. High strength and high rigidity;

5. Good toughness and not easy to be brittle;

6. 10 times higher toughness than PLA on the market

Printing is smooth, and the surface of the finished product is smoother and more delicate;

Suitable for all types of FDM3D printers, suitable

Co-print crafts, artwork, industrial design samples

And product models with higher toughness requirements.

Product Parameter:

Wire diameter: 1.75/3.0MM

Tolerance: ±0.02MM

Printing temperature: 210-235℃

Floor temperature: 70-80℃

Rally (KGF): 11-15

Melt index: 9-11g/10min

(190℃, 2.16kg)

Elongation at break: 45%

Printing speed: 50-100MM/s

Air bubbles: 100% zero bubbles

Net weight: 1.1KG/roll

Gross weight: 1.45KG/roll

Length: 1.75MM(1KG)=330M,

3.0MM(1KG)=110M

3.PLA Filament Features & Parameter:

PLA Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;

2. Bright color;

3. Low shrinkage;

4. High strength and strong rigidity;

Suitable for all types of FDM3D printers, suitable

Co-print crafts, artwork and industrial design samples

Grade

PLA Product Parameter:

Wire diameter: 1.75/3.0MM

Tolerance: ±0.02MM

Printing temperature: 200-230℃

Bottom plate temperature: need to apply glue when not heating

Heating 60-80℃, no glue

Rally (KGF): 11-16

Melt index: 7-9g/10min

(190℃, 2.16Kg)

Elongation at break: 4%

Printing speed: 50-100MM/s

Air bubbles: 100% zero bubbles

Net weight: 1.1KG/roll

Gross weight: 1.45KG/roll

Length: 1.75MM(1KG)=330M,

3.0MM(1KG)=110M

4.PETG Filament Features & Parameter:

PETG Filament Features:

1. Environmental protection and non-toxic;

2. Bright color;

3. Low shrinkage;

4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent

The toughness, weather resistance, and good adhesion.

5. Good dimensional stability, no cracks

And warping.

6. High transparency and good gloss.

Suitable for all types of FDM3D printers, suitable

Co-print all kinds of commonly used models, crafts, industry

Pieces, advertising words, etc.

PETG Product Parameter:

Wire diameter: 1.75/3.0MM

Tolerance: ±0.02MM

Printing temperature: 220-250℃

Bottom plate temperature: need to apply glue when not heating

Heating 60-80℃, no glue

Rally (KGF): 8-14

Melt index: 6-11g/10min

(220℃, 2.16kg)

Elongation at break: 210%

Printing speed: 50-100MM/s

Air bubbles: 100% zero bubbles

Net weight: 1.1KG/roll

Gross weight: 1.45KG/roll

Length: 1.75MM(1KG)=320M,

3.0MM(1KG)=105M

Payment

*If you have any question about payment, please feel to contact us.

* Check Payment problem on this link

*http://help.aliexpress.com/pay_order.html

*you can pay using Master Card; Visa; Western Union; QiWi and Bank Transfer

Shipment

*We will ship within 48 hours(Working days).

*We have oversea warehouse: Australia, Germany, Spain, US, UK, France, Czech Republic.

Feedback

* Your feedback is very important for our store and customer.

* If you have any problem with the product, please feel to contact us, we will try to solve problem till you are satisfied.