Tech Cherry Burl Wood Veneer Unique Figured Panels for Furniture Cabinet Door DIY Wall Decor Art Projects Veneer L:250x58cm

Length:2.5Meters Width:58-60cm Thickness:0.25mm （Veneer back have non-woven fabric）

High-Tech Cherry Burl Wood Veneer Tree Root Veneer for Luxury Furniture Door Panels,Wall Decor & Artistic Projects,Modern Cabinet Making,Luxury Interior Design,Custom Table Tops,Artistic Wardrobe Doors,Guitar Instrument Crafting Panel

About the Veneer

Wood veneer retains the original grain patterns, colors, and textures of the wood species from which it is cut. So the actual grain and color you get may differ from what is shown in the pictures.The products are all photographed in real objects, and color differences due to differences in angle and lighting are normal phenomena.

♥ Non self-adhesive wood veneer,It doesn't have backing glue, so it needs to be used in conjunction with wood glue.

♥ The front of the wooden veneer is polished . There is a layer of non-woven fabric or kraft paper on the back for protection, which can be used directly without processing.

♥ Wood veneer is commonly used for density ordinary boards, woodworking boards, and solid wood,Not suitable for rough and uneven surfaces.

♥ The surface of paint and melamine board needs to be deeply polished before use.

Engineered Wood Veneer(Tech Wood Veneer) is a high-performance material created through advanced manufacturing techniques that enhance the natural beauty of wood. By restructuring wood fibers under precision engineering, it achieves exceptional uniformity in grain, color, and texture—offering greater stability and resistance to environmental changes compared to traditional veneer.

Widely used: woodworking veneer, furniture decoration veneer, home decoration veneer, wooden door decoration veneer, audio decoration veneer, musical instrument decoration veneer, car and RV interior veneer, DIY Handmade veneer，wall decoration veneer, etc

Tips for Using

1. Gluing

Firstly, after leveling the base layer, use a roller or scraper to apply glue to the attached base layer and let it stand for 3-5 minutes.

2. Veneer

Paste and smooth the wooden veneer. For large areas, it is recommended to press it flat from the middle to both sides, squeeze out air, and do not apply too much force. (Can be ironed with an iron)

3. Waxing

It is recommended to gently polish and apply environmentally friendly wax oil with fine sandpaper after the wood veneer adhesive has completely dried.