Durable Concrete Tool, 1200W Engine, Anti-Skid Handle & Fuel Saving

Description
The hammer machine is made of premium aluminum and plastic with high strength. The three functions (hammer/drill/pick) can meet your various needs and the powerful engine can promote your efficient work. It is an ideal choice for electricians, carpenters, etc.
Details
Heat Dissipation Holes: The heat dissipation holes on the sides can dissipate heat in time and prolong the service life of this product.
Fuel Tank: The large fuel tank (0.9L) can avoid frequent adding. Meanwhile, the semi-translucent design is convenient for you to observe the remaining fuel quantity and add fuel in time.
Muffler: The internal silencer can reduce the noise (≤104dB) when in use to protect your hearing.
Specification
Color: Black
Material: Aluminum, Plastic
Style: Modern
Surface Treatment: Painted Process
Assembly Required: Yes
Power: 1200W
Displacement: 32.7CC
Engine Type: Single Cylinder, Air Cooling, 2-stroke
Impact Frequency: 3200min-1
Impact Energy: 30J
Max Torque and Speed: 1.5N.m/5000rpm
Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil)
Fuel Tank Capacity: 0.9L/0.2gal/30Oz
Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour
Max Drilling Diameter: 40mm/1.5inch
Starter System: Hand Pull Start
Noise: ≤104dB
Net Weight (Exclude Drill): About 10.5kg/23lbs
Product Size (L*H): 63*24cm/24*9inch
Engine Size: 36*32mm/14*12inch
Drill Size: 22*350mm/0.8*13inch
Point Chisel Size: 18*350mm/0.7*13inch
Flat Chisel Size: 16*280mm/6*11inch
Auxiliary Handle Length: 13cm/5inch
Package Included
1* Hammer Drilling Machine
3* Drills
1* Point Chisel
1* Flat Chisel
1* Fuel Tank
1* Funnel
Other Accessories for Assembly
Notes
Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder.
Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally.
Please add lubricating oil regularly to ensure strong power.
Please do not touch the muffler exhaust hole to avoid scalding.
The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1. Please do not use cheap inferior engine oil.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
Strong Power: The two-stroke engine with high power (1200W) and large displacement (32.7CC), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5000rpm).
3-in-1 Functions: Equipped with three drill bits and two different chisels, it can be used for hammer, drill, or pick by adjusting the knob on the side to meet your diversified needs .
Saving Fuel: The built-in carburetor can fully atomize fuel to decrease its consumption rate to save costs.
Good Filtering Effect: The built-in air filter can well filter impurities in gasoline to reduce engine consumption and extend its service life.
High-quality Materials: The aluminum material with a painted process is glossy and can resist wear, corrosion, and heat. Meanwhile, the plastic material is shock-resistant and anti-deformation.