6 Ton Hydraulic Press Heavy Duty H-Frame Shop Press with Manual Hydraulic Pump & 4 Adjustable Heights for Bearing Bushings

Manual Hydraulic Press 6 Ton H-Frame Bearing Press with 4 Height Settings for Automotive Repair Shop to Remove Bearings Bushings U-Joints

Specification

Operation Mode: Manual

Material: Carbon Steel, Rubber, Manganese Steel

Process: Stamping, Cutting, Welding, Spraying

Max. Pressure: 6T/13227.74lbs

Stroke: 125mm/4.92in

Working Distance: 0-28cm/0-11.02in

Head Size: 40*14cm/15.75*5.52in

Product Size: 50*40*90cm/19.68*15.75*35.43in

Package Size: 94*46*11cm/37.01*18.11*4.33in

Gross Weight: 24kg/52.91lbs

Net Weight: 22kg/48.5lbs

Package Included

1 * Hydraulic Press

Other Accessories for Assembly

Notes

1. Please read the product labels carefully before use.

2. Please do not work under lifting loads without additional support devices.Please do not exceed the rated load capacity of the product.

3. Steel and other materials can fail or shatter under pressure. Please always ensure that appropriate personal protective equipment (PPE) (not included) is worn.

4. If you detect or suspect any indication of an imminent structural failure, please stop and inspect the product from a short distance. If it appears to be in an acceptable condition, carefully release the pressure on the jack and do a very thorough examination of the structure.

5. The product base should always be placed on a solid and level surface. If it is used on bulky or unstable items or used on a regular daily basis, please bolt it to the floor to improve the structural rigidity.

6. Please do not use the product to compress springs or any other item that could potentially be ejected from the press and cause a hazard.

7. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.