2 in 1 Soldering Station LCD Digital Display Welding Rework Station Soldering Iron Kit Original C210 C115 For SUGON T3602

2 in 1 Soldering Station LCD Digital Display Welding Rework Station Soldering Iron Kit Original C210 C115 For SUGON T3602

Package list :

1 x 210 Handle

1 x 115 Handle

1 x Power Cable

1 x Grounding Wire

1 x wire brush

2 x steel ball

1 x Sponge

1 x Manual

1 x Calibrator sugon-S191（GIFT）

1 x Silicone pad（GIFT）

1 x Kaisi C210-I Soldering Iron Tips（As shown）

1 x Kaisi C210-IS Soldering Iron Tips（As shown）

1 x Kaisi C210-K Soldering Iron Tips（As shown）

1 x Kaisi C115-I Soldering Iron Tips（As shown

1 x Kaisi C115-IS Soldering Iron Tips（As shown）

1 x Kaisi C115-K Soldering Iron Tips（As shown）

Suggestions to buyers:

When the buyer receives the goods, it is recommended to take the unpacking video of the received goods to avoid receiving damage to the machine and accessories, and communicate with our merchants as soon as possible. Avoid unnecessary disputes.

Features:

Model: SUGON T3602

Power Consumption: 240W

Input Voltage: AC 110V / AC 220V 50/60Hz

Range of Temperature: Decide by working mode(200℃-450℃ / 212°F-842°F)

Temperature Stability: ±2℃/Without air flow and no load

Tip to Ground Resistance: <1Ω(DC)

Tip to Ground Potential: <25mV(True RMS)

1. In the working state, long press the "SET" key in A/B area to enter the temperature calibration setting state interface.

2. Press "▲▼" to adjust and correct the temperature. After setting, press the "SET" key again to save and exit the temperature calibration function, and enter the working state.

Note: A soldering iron corresponds to A "SET" key, and B soldering iron corresponds to B "SET" key.

T3602 needs less than 5% power to maintain a constant temperature of 300 degrees Celsius. The use of low power can extend the life of the soldering iron tip and reduce the consumption of the soldering iron tip. This is the careful design of sugon.