CONENTOOL 12 Inch Oil Chainsaw Wood Logging Cutting Electric Chain Saw Pruning Branches One-Handheld Garden Tools Chain Saw 25CC

FeatureTwo-stroke single cylinder design‌

The engine adopts a two-stroke working principle, that is, in a complete engine cycle, the piston moves up and down twice to complete two strokes of the four strokes of intake, compression, work and exhaust. This design makes the engine relatively compact, lightweight, and easy to carry and install.
​
​‌Air-cooled cooling method‌:
​The engine uses air-cooled heat dissipation, which takes away the heat generated by the engine through the air flow, thereby maintaining the normal operating temperature of the engine. This cooling method does not require an additional cooling system, further simplifies the engine structure and reduces costs.
​
​Specific power and speed parameters:
​The engine displacement is 25cc, the rated power is 0.96kw, and the high speed is 11,500rpm. These parameters show that the engine can provide sufficient power output under a smaller volume and weight to meet the needs of specific application scenarios. At the same time, the wide speed range also allows the engine to adapt to different workloads.
​
​‌Fuel and engine oil mixing ratio requirements‌:
​The engine requires a specific fuel-oil mix ratio (25:1) to ensure its proper operation and extend its service life. This mixing ratio requires that the user must mix gasoline and engine oil in proportion when using it, otherwise it may cause engine failure or performance degradation. This requirement also reflects the particularity of two-stroke engines in terms of lubrication and cooling.
​
​Rich accessories available:
​In addition to the engine itself, it is also equipped with a wealth of accessories such as guide plates, chains, files, oil pots, gloves, glasses and funnels. These accessories not only facilitate users to install, debug and maintain, but also improve the safety and convenience of use‌

Specification

Engine: Two-stroke single-cylinder gasoline engine
​Displacement: 25CC
​Engine power: 0.96kw/11500rpm
​Idle speed: 3200±200rpm
​Fuel/Electric Oil Mixing Ratio: 25:1
​Fuel tank capacity: 230ml
​Fuel tank capacity: 160ml
​Guide rod size: 12 inches
​Chain: 3/8LP
​Chain material: 65 manganese steel
​Gross weight/net weight: 4.5kg/3.8kg

INSTALLATIN STEPS