Automatic Handheld Rebar Tying Tool 8-34mm Rebar Tying Machine Reinforcing Steel Tying Machine Rebar Tying Machine

It is suitable for bundling steel bars and can be widely used in construction sites, large bridges, highways, railways, tunnels, mining construction, farms, garden fences, floor pipelines, heating floor nets, etc.

Specification

Color: Orange
Material: Plastic, Steel
Plug Type: EU Standard
Power Source: Battery Powered
Motor Type: Pure Copper Brushed Motor
Motor Voltage: 12V
Power Adapter Input: 100-240V, 50/60Hz
Power Adapter Output: 12V DC 1500mA
Battery Type: 2* 12V Lithium-ion Batteries
Battery Capacity: 4500mAh
Usage Time On a Full Charge(Each Battery): About 2H
Battery Full Charging Time: 1.5H
Required Knot Time: 0.8s Per Time
Tying Wire Length: 110m/361ft
Tying Wire Diameter: 0.8mm/0.03in
Tying Range: 8-34mm/0.31-1.34in
Knot Wire Length: ≥40cm/15.75in
Machine Size: 27.5*6.5*24cm/10.83*2.56*9.45in
Package Size: 40*10.5*29cm/15.75*4.13*11.42in
Gross Weight: 3.2kg/7.05 lbs
Net Weight: 2.8kg/6.17 lbs


Package Included
1* Rebar Tying Machine
1 Roll* Tying Wire (Already Installed)
1 Pair* Pliers
1* Power Adapter
2* Batteries
1* Toolbox
1* English Manual

Notes

1.Please note that the product only requires the installation of one battery, while the other is for replacement use.
2.When used, the machine head needs to be perpendicular to the plane of the steel bar. In the process of machine bundling, it is strictly forbidden to touch the jaws, the wire disc, or the wire by hand under any circumstances.
3.When the machine sounds an alarm, the machine must be powered off immediately, and then work after the fault is eliminated.
4.The battery must be inserted according to the indication of the positive and negative poles. Please do not allow the battery to approach high-temperature objects, such as open flames, or directly expose the battery to damp environments, such as rainy days. It is strictly forbidden to connect the battery positively and negatively without load. If you find deformation such as battery swelling, please stop using it.
5.Please avoid collision with the product and use the specified charger to avoid product damage. When inspecting or repairing the product, you must first turn off the power of the machine and unplug the battery. It is strictly forbidden for non-professionals to disassemble this product.
6.This product should be placed in a place where children should not be exposed to avoid injury. When not in use, please store this machine in a dry, clean, and non-corrosive environment.
7.Please read the manual completely before use, and pay particular attention to the safety instructions included.
8.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.