350W 24V/36V Electric Brushed Motor MY1016 Permanent Magnet Low Noise Motor Large Torque 11 Gears for DIY Generator

It is applicable to motorized scooters, small four-wheel vehicles, kart racing, off-road four-wheel kick scooter, electric bicycles, ATVs, mini electric motorcycles, and electric trikes with wheels less than 12 inches. It can also be applied to some mechanical equipment, such as lawnmowers.

Type 1：24V

Color: Black+Silver
Model: MY1016 (25H 11Teeth)
Material: Copper
Process: Electroplating
Motor Type: DC Permanent Magnet Brush Motor
Voltage: 24VDC
Output Power: 350W
Rated Speed: 2750 RPM
Rated Current: 19A
Number of Wirings: 2 (Black & Red)
Noise: ＜55dB
Waterproof Grade: IP54
Load-bearing Capacity: 100kg/220.46lbs
Motor Cable Length: 30cm/11.81 in
Shaft Length: 3cm/1.18 in
Motor Body Size(D*H) : 10*10.5cm/ 3.94*4.13 in
Mounting Base Size(L*W): 11*5.5cm/4.33*2.17 in
Package Size: 15*15*15cm/5.9*5.9*5.9 in
Gross Weight: 2.8 kg/6.17 lbs
Net Weight: 2.66 kg/5.86 lbs

Type 2:36V

Color: Black+Silver
Material: Copper
Process: Electroplating
Motor Type: DC Permanent Magnet Brush Motor
Voltage: 36V DC
Output Power: 350W
Rated Speed: 2750 RPM
Rated Current: 12.5 A
Number of Wirings: 2 (Black & Red)
Noise: ＜55dB
Waterproof Grade: IP54
Load-bearing Capacity: 100kg/220.46lbs
Motor Cable Length: 30cm/11.81 in
Shaft Length: 3cm/1.18 in
Motor Body Size(D*H) : 10*10.5cm/ 3.94*4.13 in
Mounting Base Size(L*W): 11*5.5cm/4.33*2.17 in
Package Size: 15*15*15cm/5.9*5.9*5.9 in
Gross Weight: 2.8 kg/6.17 lbs
Net Weight: 2.66 kg/5.86 lbs

Details

Wide Mounting Base: It can make the motor more stable and allow you to easily install it on an electric vehicle.

All-copper Coil: It adopts all-copper coils, which have excellent electrical conductivity and low loss, ensuring the efficient operation of the motor.

Package Included

1* Electric Brushed Motor

Notes

1.Please check connector type, motor size, and specs before purchasing.
2.Please note it is normal for the electric machine to heat up slightly during operation.
3.Please connect each wire correctly to ensure that the machine can operate normally.
4.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.