Wurkkos HD20 Headlamp Rechargeable 21700 Headlight 2000lm Dual LED USB-C Reverse Charge Magnetic Tail Work Camp Light

Wurkkos HD20 Headlamp

Wurkkos HD20 is a professional, bright angle-head flashlight and toollamp, designed for multiple indoor and outdoor activities like camping, hiking, fishing or hunting. With the supplied headband it can also be used as a headlamp. It is powered by a single rechargeable battery, is rechargeable via USB-C (both type A-C and C-C cables). Moreover, a magnetic tailcap and a sophisticated user interface for flexible and convenient one hand operation.

LH351D and XP-L HD LED in neutralwhite tint (5.000K) enable HD20 to provide both spotlight and floodlight in one single flashlight. Using 90CRI for floodlight result in great color rendition at close ranges.

Specifications

☀Emitter: 1x TN3535 + 1x XP-L HD 70CRI

☀Operating voltage: 2.7V – 4.35V

☀Battery options: 1x 21700 or 1x 18650 lithium-ion battery

☀Dimension: 122mm (length) x 30mm (head diameter)

☀Weight: 130g / 0.28lb (without battery)

☀Flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured to hard-anodized to military grade specification type III, anti-abrasive finish to get solid built body, anti-crash geometry and better heat exchange.

☀Water resistance i.a.w. IP-68 (up to 2m / 6.56 ft. under water)

☀Reverse polarity protection to protect against improper battery installation.

☀Advanced Temperature Regulation (ATR) technology: ATR automatically reduces the brightness level when the driver temperature reaches 60°C to prevent overheating

☀Low voltage warning

Power Indicator

The LED indicator in the side switch shows the power status for 5 seconds after turning HD20 on.

♣Green = remaining battery power is good (more than 30%).

♣Red = remaining battery power is poor (less than 30%).

♣Flashing Red = critical power, replace or recharge battery as soon as possible.

Low Voltage Protection: If the battery’s voltage is lower than 2.7V, HD20 turns off automatically to avoid battery damage by overdischarge.

Steps

In the shutdown state:

1. Long press: enter the moonlight file, click close;

2. Double-click: enter the extremely bright file, double-click to switch the sequence of flash-SOS-beacon-burst-extremely bright, and click to return to the original state.

3. Three clicks: Check the battery level and turn it off after five seconds.

4. Four clicks: locked state, flashing prompts to enter lock. Long press to enter the moonlight file, let go to close, four clicks to unlock the lock.

In the power-on state:

1. Long press: switch the low-medium-high position in turn, let go to select the setting.

2. Click + long press: switch the order of floodlight-spotlight-spotlight, let go to select the settings.

3. Click: close;