Suspension Coil Spring Kit For Toyota Celica FWD 11.1993.11-1999.08 Lowering Adjustable Coils Set Front Rear

Introduction
MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.




Application
For Toyota Celica GT GTS FWD 1989.10- 1993.11 (ST18#)
For Toyota Celica FWD 11.1993.11-1999.08 (ST20#)
Pls Note It is not suitable for ST158, AWD
Notice: The coilovers kit will "Lower your car" and does not keep to the original ride height.





Specifications
Front top mounts: Pillow ball with camber adjustable
Rear top mounts: Pillow ball
Damping: 24 ways damping adjustable
Spring rate Front: 10kg/mm (556 lbs/in)
Spring rate Rear: 6kg/mm (336 lbs/in)
Adjustable height: Yes lowering 1" to 3"
Shock type: Twin tube
Spring preload: 7-10 mm
Color: Golden body with black spring





Package included
Complete coilovers for 2 front and 2 rear
A pair wrench for height adjustment








Dimension
Weight: 30400g
Size: 63*51*21 cm








Feature

1. Lowered height adjustment from 1" - 3" (depends on vehicle models) which allows a lower center of gravity and also adds a more aggressive stance
2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response. ( for some models)
5. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight
6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
7. High tensile spring--- 600,000 times continuously test to assure its high tensile strength.
8. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts





Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.







Notice

* Professional installation & alignment suggested.

* Please check our store for other auto parts you may be interested in.