Nail Sterilizer Carbinet Advanced Version Manicure Beauty Salon High Temperature Disinfection With LCD ForUsing Nail Tool

Advanced Version Nail Sterilizer Carbinet High Temperature Disinfection With LCD For Manicure Beauty Salon Using Nail Tool

High temperature sterilizer for manicure disinfection box for nail art tools dental tools

It is well-known that high temperature can kill bacteria and virus attached to article. The maximum temperature can reach 200 Celsius degree. Thisdevice is widely used in labratories, catering service and beauty salons.

Name: Nail Tools Sterilizer

Timer: 0-120 minutes Adjustable

Temperature: 40-200°C Adjustable

Voltage:100V-120V/60Hz or 220V-240V/50Hz

Power: 300 Watts

How to use:

1. Put the tool sterilizer in a stable surface.

2. Open the lid, pour quartzite into the pot; quartzite can not be too much(not beyond 80%of the inside capacity).

3. Connect the power,and turn on the switch ,the light turn red and the product begin to heat at the same time.

4. After 12- 18 min heater, insert the tools(scissors, razors, nail cutter, etc) into quartz sand vertically.

5. Wait for 20--30 seconds, put on the adiabatic gloves and take out the sterilized tools.

6. When the inside tank reach the setting temperature, the light will be automatically off and the sterilizer stop heating;

7. And the sterilizer will heat automatically when the temperature is lower than 135 degree, indicator light will turn on again.

IMPORTANT! Tools should be sterilized without the use of a kraft bag. If you use a kraft bag, please make sure the temperature is below 140°C

IMPORTANT INFORMATION:

1. Remove the protective film from the grids before using the equipment.

2. Instruments are sterilized without the use of a kraft bag. To avoid burns, electric shock, fire, or injury, follow safety precautions.

3. Do not install or store the device in rooms with high humidity.

4. Do not place the oven on a damp surface.

5. Even when the appliance is inoperative but connected to the mains, it is dangerous.