SUNLU Standard Resin 2KG 1KG / Bottle 405nm UV Resin For LCD 3D Printer Material For Printing Good Precision Free Shipping

Features：

Color : 10 colors

Packing size: 635*270*265mm

G.W/box: 1.19KG

Gift box size: 250*120*120mm

Net weight: 1kg/pc

1. Standard photosensitive resin, suitable for beginners and model hand printing,

2. Easy to form, good precision, low odor, high cost performance

Notes:

1. Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight.

2. Do not take orally. Keep away from children. Wear gloves before use to avoid direct contact with skin and maintain indoor ventilation; Do not get into eyes. In case of accidental contact, rinse with plenty of water as soon as possible. In case of discomfort, seek medical advice in time.

3. The printed resin model needs to be cleaned with high concentration alcohol (above 95% concentration is recommended, the higher the better) for about 30s; After cleaning to dry alcohol after secondary curing, so as to get the best performance.

4. The used resin in the chute shall not be put back into the unused resin, and the resin shall not be placed in the chute for a long time(if not for a long time, the resin can be imported into the container and sealed with plastic wrap for shading preservation), so as to avoid the contamination of the resin to affect the printing effect.

5. Store it away from light at room temperature. The sun contains ultraviolet rays, which will cure the photosensitive resin; It is recommended to store it at an ambient temperature of 15-35 ℃. The lower the temperature in winter, the higher the resin viscosity.

6. Sealed and stored to avoid dust or moisture, which will affect the printing quality.