Electric Polishing N3 Micro Motor Polisher Marathon Dental Lab+35K RPM Handpiece

The body of this product is small and light, and its handle can be used at will like a pencil. And its maximum rotation force can reach 35000rpm, which is suitable for cutting, grinding, polishing, and other work. You can replace various burrs at will according to the material and working method.

Application

This product is suitable for cutting, grinding, and polishing. You can use various burrs according to the material and working method. The products are mainly used in dental laboratories and clinics, jewelry, nails, sculpture, orthopedics, and other purposes.

Specification

Material: Plastic, Stainless Iron, Copper

Power: 65W

Torque: 280gf.cm

Output: DC30V.0.5A

Input Voltage: 110-220V/50-60Hz

Speed: 0-35000rpm/min

Gross Weight: 2kg/ 4.4lbs

Fit Bur Size: 2.35mm/0.09in

Pedal Line Length: 1.6m/5.25ft

Power Cord Length: 1.55m/5.09ft.

Package Size: 25*22*10cm/9.84*8.66*3.94in

Package Included

1 * MarathonControl Box

1 * Foot Pedal

1 * Handpiece Base

1 * Handpiece

All Accessories for Installation

Notes

       When turning the machine on or off and do reversible switching, please remember to set the speed control to zero.  

       To avoid the problem of lax speed control and extend the service life of the machine, please adjust the speed of the speed controller to "minimum" before starting the following operations: press the "on" or "off" button to switch the speed between clockwise and counterclockwise directions, or switch the control between manual and foot pedal.

       Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Dear Customer,

Thanks for choosing our products.If any question about goods,take photo or videod,contact us before opening a dispute, problem will be solved at first time.