30Mpa PCP Air Compressor 220V 1.8KW High Pressure Air Pump Portable Pneumatic PCP Rifle Airgun Scuba Inflator 2800RPM

✨Operation Method Of Electric Air Pump:

Check the amount of oil before each use, the oil should exceed the red dot, but not too much. The oil that is exported to foreign countries is taken out and needs to be added by itself.

Replace the breathing plug. Change the oil cover used for transportation to a strip-shaped breathing plug.

Loosen the air bleed screws on both sides before starting the machine(remember, the machine needs to start under zero pressure. If the bleeder screw is not loosened, the machine will not start. After starting the machine, tighten the bleed screws on both sides to press normally after the end of the inflation, loosen the deflated screw and then deflate, then take the inflation joint).

To install the water pump, you need to put the water pump into the water. The more cold water, the better. After the water pump is normally circulated, the electric air pump can be turned on manually shut down after reaching the required pressure,the whole process needs attention, and it is forbidden to leave

✨Main Applications: High Pressure Testing, Bottles, Automobiles

✨Specifications：

Name: Electric High Pressure Inflatable Pump

Power Supply: 220V/50Hz

Current: 8A-10A

Work Pressure: 0-30 Mpa

Available Capacity: 0 - 6.8L

Speed: 2800R/Min

Cooling Mode: Water Cooling + Air Cooling

Power: 1800W

Compression Mode: Secondary Compression

Weight: 17Kg

Lubrication Mode: Oil Splash Type

Size: 34Cm * 18Cm * 37Cm /13.4*7.1*14.6In

Net Weight: 15kg

Working Noise: 70db

Use Time: 6.8l (45 Min); 0.5l (5 Min); 0.45l (4min); 0.35l (3: 40min)

✨Packing List:

1xair Pump

1xmanual