Electric Concrete Vibrator, Handheld Poker Vibrating Cement Mixer Vibrating Tool 1300W 4300RPM

An efficient machine can facilitate your outdoor work, reduce your workload, and increase your productivity. Featuring a 1300-watt motor, this concrete vibrator is suitable for curing cement and removing all air bubbles to give you the toughest cement possible. It also makes the surface of the concrete flat, preventing cracks and defects from appearing after the concrete has cured

Application:

It is widely used in commercial concrete, bridges, port construction, large dams, hydroelectric power plants, transportation, water conservancy, port, mine and metallurgy, high-rise building foundation pouring piles, dense steel mesh concrete walls and large, medium and small construction projects, patching and other repair jobs, etc

Key Features:

High Efficiency: The high power (1300W) pure copper motor can make the product rotate with a high speed of 4300 rpm so that the concrete mixing can be done efficiently in a shorter period

Large Work Area: It is equipped with a long vibrating rod (6.6ft), allowing you to cover a large area to promote work efficiency

Low Noise: The all-copper motor runs smoothly and works with very low noise, which provides you with a more comfortable and quieter working environment

Lightweight and Compact: It is lightweight and compact and allows you to easily carry it to the workplace

Heat Dissipation Holes: The product is designed with multiple holes on both sides, which can ensure that the motor can dissipate heat for a long time, prevent burns, and prolong the life of the motor

Specifications:

Model: 35-1
Material: Nylon, Steel Wire, Rubber, Copper
Style: Handheld Concrete Vibrator
Color: Yellow
Power Source: Corded Electric
Motor Type: Pure Copper Motor
Plug: EU Standard
Power: 1300W
Actual Power: About 1000W
Speed: 4300RPM
Plug Voltage: 220V 50/60HZ
Power Cord Length: 2m/6.6ft
Vibrating Rod Size(L*D): 2m*35mm/6.6ft*1.3inch
Package Size: 72*11*33cm/28.35*4.33*12.99in
Gross Weight: 6.9kg/15.21lbs

Package Included:

1* Concrete Vibrator
1* Vibrating Rod

Notes:

1.Before running the concrete vibrator, you should check whether the power cord connection is correct and put on insulated gloves (not included). After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation

2.When a vibrating rod works, it should be inserted vertically or inclined into the soil, pounding vibration after some time can be. The vibration of the vibrating rod should be up and down pumping. The vibrating rod should not be bent more than 60°

3.After working continuously for half an hour, the vibrating rod should stop for a while to prevent the machinery from heating too much and damaging the machine parts

4.After using it for some time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent the mortar water from penetrating the rod, causing the vibrating rod not to vibrate

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order