ADHESION PROMOTER + DOUBLE SIDED TAPE = BEST BUDDIES EVER 944 Primer Acrylic Foam Tape Increase Viscosity 80%

Wait...  We know what you are thinking...

"WHAT SHOULD I USE THESE FOR?"

Well, we have something for you

You might also want to use adhesion promoter with some nice tapeswith links below :)

ADHESION PROMOTER + TAPES = BEST BUDDIES EVER

Why use primer?

- Prime ensures better adhesion of paint to the surface, increase durability, and provides additional protection for the material being painted.

- It allows things to adhere much better than using any other adhesive materials alone.

Features:

- The initial viscosity is very strong, and it can reach the destruction level in a short time.

- This product is suitable for: rain shield, handle, door bowl, window trim, anti-collision tape, lampshade, fuel tank cover, rear shield, middle mesh trim, welcome pedal, EPDM / TPE rubber seal Other car modification parts.

Tips for using:

- Surface Preparation: The bonding surface must be relatively clean and dry. Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture.

- Make sure the primed surface remains free from contaminants before you apply the tape.

-This is not glue and cannot be used as glue alone. Adhesion promoters are used to better bond the tape. You need to apply it on tape or any adhesive.So Need to be used together with double-sided tape for better use.

The main purpose of the primer is to strengthen the adhesive effect of films, tape or other self-adhesive materials. Primer - -an indispensable assistant at the car wrapping vinyl film! Without it, no professional work done.

Clean-up:

Primer can remove residual glue. Need to scrub vigorously.

Primer Instructions:

Step 1: Prepare the primer.

Step 2: Apply the primer to a clean, dry surface (simply ''paint'' the spot)

Step 3: Allow the primer to completely dry for 5 minutes.

Step 4: Apply the tape product

Step 5: Allow 72 hours of dwell time before us.(80% Increase Viscosity)

Tapes+ primer Time:After application, the bond strength will increase as the adhesive flows onto the surface. At room temperature approximately 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hoursand 100% after 72 hours.