Cold Welding Glue Metal Repair Glue Heat-resistant AB Sealant High-strength Magic Plastic Repair Casting Adhesive Epoxy Resin

Note:
If the glue will dry after receiving it, please soak the glue in hot water for a while to melt it. After melting, it can be used normally without affecting the effect.
Features:
High-Temperature Resistance: A+B repair glue can withstand temperatures up to 150°C.When fully cured, it is as hard as iron and provides uniform bond line thickness.
Long-lasting Bond Strength: It forms a strong and stable permanent bond that should last for ages.Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years.It can be shaped, tapped, filed, sanded and drilled depending on its purpose.
Simple to Use: The preparation and application are simple and easy,Just mix, sets in minutes, and fully cured in 4-6 hours.
Surface Application: Before using the glue, clean and drying the surface and your work should be complete within 20 minutes after mixing.Mainly used for iron and steel casting, sand holes and pores,Also can be used to repair fuel tanks, plumbing, concrete breaks, and a whole lot more.
Specification:
Product Name: Metal Repair Glue
A+B Content: 20/50/70/100g
Hardness: ≥80
Shear Strength: ≥18
Temperature Range: -60°C~200°C
Volume Ratio: A:B=1:1
How to Use
The glued surface should be polished with sandpaper to keep it clean and oil-free. After mixing thoroughly in the ratio of A:B=1:1, it should be applied to the glued surface. It should be initially positioned at room temperature for 3-6 hours, reaching 70% strength in 20 hours, and reaching 100% strength after 48 hours.Shear strength>20MPa (200Kg/cm).Can be used in an environment of -15-200℃.