Electric Swimming Pool Filter Pump Water Cleaning Pump Above Ground 300 gal/hr

Specifications:

Rating: 220-240V, 15W

Pump water flow rate: 1135 l/hr

Voltage: 220-240V

Pool valves outer diameter: 32mm/ 1.25in

Pool system water flow rate: 300 gal/hr

Pump Size: 16*16*19.5cm

Type: Filter pump

Color: Light Grey

Descriptions:

Compatible with pools with hose fittings

Pump capacity of 300 GPH for pools up to 18 feet

Easy-to-clean, replaceable 290589 filter cartridge (not included)

Comes with 2 hoses for added convenience

Just hook up hoses and plug into a 220V power outlet for easy install

Conforms to CETLus standards

Features:

Just relax in your pool and let the 300 GPH Filter Pump take care of the filtration. This cartridge filter pump is the best little workhorse you'll find to keep your pool sparkling clean.

Designed for above ground pools up to 18 feet, it's also great for other pools with 1.25-inch diameter hose connections. To install, just hook up hoses and plug into a 220V power outlet. Uses an easy-to-clean, replaceable filter cartridge (not included). This pump includes 2 hoses for added convenience.

The GFCI (ground fault circuit interrupter) feature and CETLus approval on the 300 GPH pump provides additional safety and protection.

Help keep your pool water crystal clear all summer long with the 300 GPH Above Ground Swimming Pool Filter Pump.

Package Included:

1 x Filter Pump

2 x Hose

1 x Filter

2 x Nozzles

1 x Manual

Notes:

The 300 gallon theoretical water flow flux of the machine is difficult to generate visible water flow at the water outlet (the water outlet is below the water surface). It is necessary to touch whether there is water flow at the water outlet.

The machine has over temperature protection. If it is used for a long time, the machine control motherboard will forcibly shut down according to the internal temperature. Restart the machine after the internal temperature drops to a safe value.

When using this product, the connection port of the swimming pool connected with the water inlet end of the machine must be submerged under the water surface, otherwise the machine will be dry and unable to work until it is shut down or damaged.