1PCS Portable Electric Cordless Battery DIY Adapter Converter For Makita 18V W/Fuse Lithium Battery For Rc Car Robotics Rc Truck DIY USE Power Tools Accessories(No Battery)

3D printing plastics have limited heat resistance. When working with continuous high current, it is forbidden to wrap the adapter tightly and reserve space for ventilation and heat dissipation. If the surface is obviously hot, immediately turn off the power and let it cool down.

The strength between printing layers is limited. It is prohibited to smash, pry, or twist the adapter base vigorously to avoid buckle breakage and base delamination and cracking.

Overload operation is prohibited: If the toy car is climbing a hill or working continuously at full load, if the wires or adapters become hot, stop immediately and reduce the load.

Waterproof requirements: The entire set of adapters is non-waterproof, and it is strictly prohibited to be exposed to rain, soaked in water, or used in humid environments for a long time; when used on water, the wire joints must be wrapped with waterproof insulation.

Battery specifications: Only compatible with For Makita original 20V lithium battery. Do not mix batteries with mismatched voltages from other brands. When the battery is exhausted, remove the adapter and charge it in time to avoid battery damage due to loss of power.

Operation and storage

The wiring terminals need to be completely wrapped with electrical tape/heat shrink tube to cover the exposed metal to prevent accidental short circuit; the bending angle of the wire should not exceed 90°, as long-term bending can easily break the internal copper wire.

When not in use for a long time, separate the adapter from the battery and store it in a cool, dry place to avoid squeezing heavy objects.

Children must be supervised by adults at all times. Do not let children pull the power cord, disassemble the adapter, or touch the metal ends of the wires.

Package includes: 1*Adapter (Battery not included)