4PCS Servo Motor For MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor For Smart Car Robot

4PCS Servo Motor For MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor For Smart Car Robot Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc. Stall torque: 12kg/cm(6V), 13kg/cm(7.2V). Power Supply: Through external adapter, connector wire length 300mm. Stable and shock proof, coreless motor, metal gear. This high-speed standard servo motor can rotate 180 degrees (90 in each direction). Gear Type: All Metal Gears. 180 degree rotation. Controllable angle range from 0 to 180 degrees, excellent linearity, precision control. Can be rotated within 360 degrees when power off. Specifications: Connector Wire Length 300mm/11.8 inch Operating Speed: 0.17sec / 60 degrees (4.8V no load) - 0.13sec / 60 degrees (6.0V no load) Operation Voltage: 3.0V - 7.2V Gear Type: All Metal Gears Dead Band Width: 4usPlug Specification: JR FUTABA and so on Temperature range: -30 - +60deg Servo Weight: 55g Gear Type: All Metal GearsPower Supply: Through External AdapterStable and Shock ProofCompliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etcGreat for biped robot / robot / remote control car, suitable for models of 50-90 methanol fixed-wing aircraft and 26cc-50cc fixed-wing aircraft Note: Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can;t turn up to claimed degree. Connection: Red Wire: +Yellow Wire: PWM/Signal Brown Wire: GND Control Specifications: Control Method: PWMPulse Width: 500-2500Duty Ratio: 0.5ms-2.5msPulse Period: 20ms size: 40.7 x 19.7 x 42.9mm Material:ABS+Metal colour:black Package Contents: 4 x for MG995 Servo 4 x Servo Horn Kit Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.