Macerator Sewerage Pump Waste Water Marine Toilet Disposal Laundry Unit

Meet your ultimate wastewater solution: Looking to do some renovations and want to add a bathroom but the existing waste system is too far? With our Macerator Pump that can pump up to 7m vertically and 70m horizontally, you can create a wet area anywhere you want. The 600W pump features three inlets that enable you to connect to three sanitary devices such as your toilet, washbasin, shower and bathtub altogether to complete a bathroom where conventional drainage would be too expensive to consider. It is quiet in operation and fully automatic when activated by flushing. The tough stainless steel blade allows for ultra - fine cutting, ensuring that waste is properly chopped up and able to be discharged through tiny pipework back to the existing sewer connection. Start planning your renovation by ordering our macerator pump today.

Features

Quiet & Powerful Motor: 600W energy-efficient motor operates at only 60 dB for minimal noise disruption.

Exceptional Pumping Capacity: Vertical lift up to 7m and horizontal transfer up to 70m with max flow rate of 240L/min.

Triple Inlet Flexibility: Connects to 3 sanitary fixtures simultaneously (1×100mm + 2×40mm inlets) for toilets, basins, showers, or bathtubs.

Anti-Clog System: Forced start button prevents blockages; stainless steel impeller finely macerates solids for smooth 40mm outlet discharge (Note: Not suitable for insoluble materials like paper towels).

Auto-Start & Large Capacity: Activates automatically via flush detection; 5L tank optimizes operation cycles.

Backflow Prevention: Integrated check valve ensures unidirectional flow and prevents sewage reflux.

Good heat dissipation: High-temperature mechanical seal (125°C resistant) and enhanced thermal dissipation for continuous operation at ≤60°C fluid temp (ambient ≤90°C).

Extended Reach: 1.8m AS/NZS 3112-compliant power cable for flexible installation.

Genuine commercial macerator pump

Fully automated operation triggered by flushing

Superior quality seals

Stainless steel impeller blades

Specifications

Voltage: 230V / 50Hz, Australian Standard Plug

Motor Power: 600W

Material: Stainless Steel Impeller Blades

Number of Water Inlets: 3 Water Inlets

Noise Level: 60 db

Tank Capacity: 5 L

Maximum Operating Temperature: 60°C 

Temperature Resistance of Mechanical Seal: 125°C

Water Inlets: 1 of 100 mm, 2 of 40 mm

Water Outlet: 1 of 40 mm

Maximum Flow Rate: 240L / min

Maximum Head: 7 m

Horizontal Pumping: Up to 70 m

Maximum Ambient Temperature: 90°C

Cable: 1.8 m

Dimensions: 42 x 17  x 27 cm

Package Content

Sewage Lift Pump                x 1

Single Connection Sleeve     x 2

D40mm Plastic Pipe Plug     x 2

D100mm Plastic Pipe Plugl x 1

32-50 Hose Clamp               x 7

90-110 Hose Clamp             x 1

Instruction Manual               x 1