Electric Foam Cutter Hot Knife Cutter Tool Styrofoam Cutting Machine Hot Knife Rope Cutter Hot Wire Kit Foam Cutting Pen 150W

A 15cm blade and a coin groover and a 30cm folding blade The polystyrene groover is combined by a hot knife, a groover and a 30mm folding blade.

HOT TIPS

1. Heats up in about 10 seconds long service life and can work without stopping; If the tool works intermittently, suggest loosening the switch for one second after 30 seconds of working (otherwise it may cause the power tube to overheat).

2. The device is not a toy and should be kept out of the reach of children. High temperature iron can cause painful burns to the body.

3.Do not leave appliance unattended when switched on. Do not touch any hot surface.

4. Advise the use of a high quality respirator in a well-ventilated area - the fumes from melting Styrofoam are acrid and (probably) unhealthy to breathe.

Installation of 30 cm blades and accessories

Please install the blade carefully after referring to the instructions.

The 30cm attachments are adjustable, allowing you to make your own hot knife blades in any shape you need or want: U-shaped, V-shaped, square, rounded, any shape your project calls for. A great tool for cutting grooves in foam and foam rubber located in tight or hard to reach areas. Can be used for foam sculpting.

NOTE: If the grooving area is small, it can use a small hot knife knife, if it is large, it can use a large power hot knife.

·        The foam cutter/grooving cutter is for cutting different density foam around 150mm thick, with fine cutting edge, no mess.

·        Cutting with the groover- sled, it is easy to make different groove shape on the foam.

·        Processing Range: Pearl cotton, Sponge, Foam, Plastic extruded board, Insulation board, KT board etc.

·        Max Groove Width: 150mm/5.9"

·        Lenght of Bendble Blade: 300mm/11.8"

Product description

·        

·        Item Specifics:

·        -The foam cutter/grooving cutter is for cutting different density foam around 150mm thick, with fine cutting edge, no mess.

·        -Cutting with the groover- sled, it is easy to make different groove shape on the foam.

·        -Processing Range: Pearl cotton, Sponge, Foam, Plastic extruded board, Insulation board, KT board etc.

·        Power Supply: AC110V/60Hz

·        Power: MAX. 150W

·        Material: Alloy

·        Wire Length: 3m

·        Max Groove Width: 150mm/5.9"

·        Lenght of Bendble Blade: 300mm/11.8"

·        Cutter Size: 26 * 5 * 3.5cm/10.2"*2"*1.4"(1cm=0.393Inches)

·        

·        Package Included:

·        1 x Foam Cutter

·        1 x Straight Blade

·        1 x Large slotted plate

·        1 x Curved blade (300mm)

·        1 x Small wrench

·        1 x Wire brush

·        1 x T-square

·        1 x Slotted baffle

·        1 x Plastic tool box(29 x 19 x 9cm)

·        1 x English manual

·        2 x Screw