10A Smart Car Battery Chargers 12V 24V Automotive Charger Battery Trickle Charger For Lead-Acid Batteries

Performance Feature

1.One-Button repair mode charging:Use high and low frequency pulses to repair power drained batteries

2.Winter and summer mode:The charger automatically detects the ambient temperatureand enters the corresponding mode to ensure that it is sufficient in winter and not overcharged in summer.

3.Digital display:digital cycle displays the current voltage,current,power and ambient temperature.

4.Short circuit protection:When the output cable of the charger is accidentally short-circuited,the machine automatically turns off

5.Reverse connection protection:When the polarity of the output cable of the charger is reversed to the polarity of the battery,the charger will automatically turn off the outputand issue an alarm sound and a warning sign,and it will be automatically released afterthe correct connection.

6.Multi-stage charging:desulfurization mode +constant current mode+constant voltagemode pulse mode+float mode +full automatic stop.

Application

Suitable for 4AH-150AH motorcycle, limousine, off-road vehicle, Van, SUV, Dry load accumulator, maintenance-free battery.

Announcements

＊It is strictly forbidden to charge the lithium battery.

＊It is strictly forbidden to use as a startup power supply.

＊It is strictly forbidden to charge damaged batteries.

＊It is strictly forbidden to use in humid,high temperature,flammable and explosive

environments.

＊There is a danger of high voltage in the machine,please do not open it withoutauthorization,if there is any fault,please contact us.

＊ During charging,a little hydrogen gas will leak from the battery.Please keep the workingenvironment be well ventilated so as to avoid explosion.

HOW TO USE

1. Connect the red clip line of the charger to the positive pole of thebattery, connect the black clip line to the negative terminal of the battery

2. Then connect the AC power of the charger to the 220V mains.

3. Dispaly screen is light on and flashing. Charger is start working.

4. According to the capacity of the battery, press the Current gearbutton to select the appropriate charging current

5. Repairing: After step 1 and step 2,press Repair button for 5 seconds, then will entry to repair mode.

WARNING

Do not turn on the ignition switch your vehicle or use theon-board electrical appliances while you are charging！