ThinkRider Heart Rate Monitor C5 ANT+ Speed and Cadence Dual sensor Computer bike speed and cadence Suitable for iGPSPORT bryton

How to use:

If the cadence and speed are used together, you need to buy two devices.

In speed mode, you need to set the wheel diameter in the cycling computer or apps,so that the speed data is accurate.

You need to take the battery out to switch the cadence/speed mode.

Speed & Cadence Dual Sensor

BLE 4.0/ANT+/Speed/Cadence/Waterproof IP67

The latest design C5

DUAL PROTOCAL SENSOR
【Speed mode】【Cadence mode】

Matters need attention：
1. First use requires the removal of insulation in the battery compartment
2. You need to take the battery out to switch the cadence/speed mode.
3. In speed mode, you need to set the wheel diameter in the cycling computer or apps,so that the speed data is accurate.

Powerful Compatibility

... And more cycling software
Computer、Phone、Computer、Bike trainer、Sports watch

POWERFUN APP

POWERFUN APP brings together thousands of classic bike routes around the world. Install Speed Sensor and you can connect to the APP to ride.
The App Store
Search for download
Powerfun

IP67 Waterproof

Effective waterproof，Fear wind and rain

Dual Protocal sensor

【Speed Sensor Mode】：Reinstall the battery until the Red light flashes to indicate the speed mode.Spin the wheel and search for the sensor using ANT+ or Bluetooth device.

【Cadence Sensor Mode】：Reinstall the battery until the blue light flashes to indicate the cadence mode.Rotate the crank and search for the sensor using ANT+ or Bluetooth device

Low power consumption

300 hours extra long endurance
* Built-in CR2032 battery
Riding one hour a day, it lasts about 300 days

Product information

Brand：ThinkRider
Model：Speed & Cadence Dual sensor
Size：33*29.7*9.2mm
Weight：8.1g
Battery：CR2032 220mAh
Battery life：300h for speed mode；300h for cadence mode
Waterproof：IP67
Working temperature：-10℃~50℃
Communication：ANT+ & BLE
Measurement extremum：120km/h for speed;300rpm for cadence
Outer case：ABS
Color：Black

Speed/Cadence mode Installation

lnstallation for speed mode：
Buckle the curved rubber mat onto the back of the sensor, then bind thesensor with the large rubber band onto the wheel axle.

lnstallation for cadence mode：
Buckle the flat rubber mat onto the back of the sensor, then bind thesensor with the small rubber band onto the pedal crank.

Product Accessories

① Speed cadence sensor *1 CR2032 attery *1
② Rubber mat *2（flat, curved）
③ Small rubber elastic ring *6
④ User manual *1

Product show

ThinkRider HR Chest Strap use a unique calculation method, the noise is automatically filtered and the data output is stable and accurate.The Strap can be machine washed. IP67 Waterproof, don't worry about rain and sweating.The soft textile chest strap seamlessly adapts to your body shape, bringing full freedom of movement to your training. With its hook mechanism, the transmitter is just as quick to put on as it is to take off.

Dual signal:

1) ANT+: Compatible With ANT+ bike computers, wathches and cycling software:SRM Power control, Garmin, Bryton, iGPSPORT, Zwift,PerfPro,etc.
2) BLE 4.0: Compatible With selected Suunto / Polar Smart Watch, Nike+, Strava, Runkeeper, Runtastic , Runtastic Pro, Endomondo, Wahoo fitness, Wahoo utility, EliteHRV,etc

Specification

1) Sensor Dimensions :59.5*33.5*11.5mm
2) Strap Length:Length 65-95cm ( Adjustable to fit different bodies)
3) Wireless : BLE & ANT+
4) Weight: 55g
5) Heart Rate Accuracy: +/-1pbm
6) Heart Rage Range: 30-240bpm
7) Battery Type: CR2032 x 1pc (replaceable)
8) Battery Life : Approximately 18 months (base on average use of 1 hour per day)
9) Waterproof Rating: IP67
10) Strap Cleaning: Compatible with water or dry cleaning methods.(High temperature cleaning is prohibited.)

Note：

Due to international shipping protocols,batteries can not be sent in some countries / regions. In countries where batteries cannot be sent, we will disassemble the CR2032 button battery.

H603B

Heart Rate Monitor
Ideal Choice For Aerobic Exercise

Compatible

BLE & ANT+ SENSOR

IP67 Waterproof

Comes with IP67 rating, it is splashproof while being small and exquisite.You can ride daily without fear of rain.

High Performance of Real-time Heart Eate Tracking

Data contrast: ThinkRider H603B vs. P**** H**

Wearing a Method

Product parameter

Sensor Dimensions: 59.5*33.5*11.5mm
Weight: 55g
Strap Length: Length 65-95cm ( Adjustable to fit different bodies)
Wireless: BLE & ANT+
Heart Rate Accuracy: +/-1pbm
Heart Rage Range: 30-240bpm
Battery Type: CR2032 x 1pc (replaceable)
Battery Life: Approximately 18 months (base on average use of 1 hour per day)
Waterproof Rating: IP67
Strap Cleaning: Compatible with water or dry cleaning methods. (High temperature cleaning is prohibited.)

Directions for use

1.Dip the heart rate band with a small amount of water before wearing it
2.Install the host monitor to the button of the chest strap,notice the left and right positions.
3.Adjust the length of the chest strap so that it is comfortable and fits the chest.
4.Make sure the electrode is close to the skin and the monitor is centrally located.

Q. what software and bike computers do the product support?

A. As long as your computer and software support ant+, mobile software support BLE 4.0.

Q. how long does the heart rate monitor last and what kind of battery does it use?

A. The heart rate monitor uses a CR2032 button battery and a new battery can last for 300 hours.

Q. Why can't the heart rate monitor be connected to the device?

A. Please check whether the BLE of your device is enabled. If the BLE is enabled, you can dip some water on the back of the device to keep the electrode area of the device close to the skin and the heart rate host is located in the middle of the chest.