Ship from USA 48V E-Bike Battery Genuine / 5 Pin Hailong 36V 48V 52V 20Ah / 20000mAh 200W -1500W Electric Bicycle Bike Ebike 18650/21700 Lithium Battery Pack 40A BMS for Bafang BBS02 BBS03 BBSHD Motor With 2A Charger, XT60 Connector, USB Port and Base

Product Specifications:

Please confirm the motor and voltage of your ebike before the purchase and check whether the size of the battery can be placed in your bike's frame,and finally choose the battery that fits for your bike.

Specification：

* Brand：Aleaivy

* Battery Cell Composition: Lithium Ion A+++++ cell

* Voltage: 48 Volt

* Capacity (amp hours) : 20Ah

* Power:0W-1500W

* OUR HOLDER Plug:5-PIN

*Energy:960Wh(48V   20AH)

*BMS: 40A(48V 20Ah Battery)

*Charge Temperature Range: -20°C-55°C/-4~131 ℉

*Chemical Composition: Lithium Iron Phosphate (Li-ion)

*Discharge Temperature: -20~ 65°C/-4~149 ℉

*Maximum continuous discharge: 40A

*Type: Lithium Battery

* Peak Discharge Current :120A(40A BMS)

* Continuous Discharge Current : 40A

* Fit ebike: For 48V 200W-1500W ebike Electric Bike

* Long life 1500+ deeply cycles,Quality Grade A+++++ cell, Riding time   longer than ordinary batteries.

* Built in BMS with short circuit , over-current , over-heat , over-charge , over-discharge protection.

About the Battery Lights

Press the“" button the lights will turn on.

Lights-1 Red 3 Green---100%

Lights-1 Red 2 Green---75%

Lights-1 Red 1 Green---50%

Lights-1 Red 0 Green---25%(you need to charge the battery at this time)

Package List:

* 1 x 48V 20Ah Hailong Battery

* 1 x Battery Fix Plate /Frame mount With Discharging Line

* 1 x 54.6V 2A US Charger

* 1 x 40Amp BMS

* 2 x Keys

* 1 x Male XT60 Connector

* 1 x Female XT60 Connector

* 3 x Screws(One spare)

Please Note :Our batteries for electric BIKE ,If you cannot confirm the battery, please contact us,we provide 2 year warranty !

The Battery is UL 2849, UL 2272, UL 2271 certified and complies with UL standards (1012, 1310, 60950-1 or 62368-1) and can provide documentation showing certification on request.

The creepage distance and electrical gap distance in the charge are sufficient, the product does not pose a fire risk,  will not cause components to overheat or explosion,  and the output

has a fuse to protect the battery pack from overcurrent conditions.  Battery charging input and output  cables are also adequately protected against stress.

The plug meets the size requirements of the relevant standards,  and there is no risk of electric shock to the user.  The fuse complies with relevant standards and does not pose

a risk  of fire or explosion in the event of failure.  The product has been marked and labeled in accordance with the standards

Use only the charge provided with your micromobility device.  If you do not have the charge that was provided with your  device,  you can contact the manufacturer of your device

for information about compatible replacement charge.  Before buying or  using a replacement charge,  make sure it has been tested and approved to work safely with your

device.  Do not use a charge that came with another  micromobility device without confirming compatibility.

To further lower the risk of fire,  take the following steps when charging your micromobility product with the correct charge:

Unplug the charge from the micromobility device when the charge cycle is complete.  Do not leave the charge plugged  into the device for long periods of time.

Always be present when charging micromobility products, and never charge them while you are sleeping.

Follow the manufacturer’s guidance on how often you should charge your battery if you are not regularly using your  micromobility device.